Chain and Accessories

20” Concrete Diamond Chain

The embedded diamond grit cutting edge on these chains cut through concrete, masonry, and other hard materials. These chains are used on concrete chain saws.

BALL HITCH 2-5/16”

PINTLE HITCH 2-3/4” W

G70 TRANSPORT CHAIN 1/2” X 20’ W/ HOOKS OLD # 6075

Features

• Shackle Bodies Are Drop-Forged Carbon Steel
• Self Colored (Painted Blue)
• C-419-S Shackles Meet The Design Requirements Of Federal Specification Rr-C-271, Type Iva, Grade A, Class 2
• Working Load Limit, Size, Manufacture Name, Date Code And Usa Permanently Marked On Each Shackle
• Statistically Tested For Impact Resistance, Tensile Strength, Hardness, Ductility And Fatigue
• 419 Series Shackles Meet Or Exceed All Manufacturing Requirements Of The Asme B30.26 “Rigging Hardware”. These Include The Material Ductility Requirement (Section 26-1.1.2), The Design Factor Requirement (Section 26.1.2), The Identification Requirement (Section 26-1.5.1), And The Effective Temperature Range (Section 26-1.6.1). The Shackles Can Be Proof Tested In Accordance With Section 26-1.4
• Certification Available Upon Request
• 6 To 1 Design Factor
• Pins And Bolts Are Heat-Treated And Made Of Alloy Steel

Includes

1) Anchor Shackle

Features

• Shackle Bodies Are Drop-Forged Carbon Steel
• Self Colored (Painted Blue)
• C-419-S Shackles Meet the Design Requirements of Federal Specification RR-C-271, Type IVA, Grade A, Class 2
• Working Load Limit, Size, Manufacture Name, Date Code and USA Permanently Marked on Each Shackle
• Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue
• 419 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B30.26 “Rigging Hardware”. These Include the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). the Shackles Can Be Proof Tested in Accordance with Section 26-1.4
• Certification Available Upon Request
• 6 to 1 Design Factor
• Pins and Bolts Are Heat-Treated and Made of Alloy Steel
• DO NOT EXCEED THE WORKING LOAD LIMIT
• Made in the USA

Crosby 5/8” S-13326 Shur-Loc Grade 100 Self-Closing Swivel Hook – 22600 lbs WLL – #1004440

Features

• Forged alloy steel, Quenched and Tempered
• Individually proof-tested at 2-1/2 times the Working Load Limit
• Fatigue rated
• Recessed trigger design is flush with hood body, protecting it from damage
• Positive Lock Latch closes automatically when hook is loaded
• New design makes hook compatible for use with both wire rope and Grade 80 / 100 chain slings
• Anti-friction bearing design allows hook to rotate freely under load

Slip Hook, Material Carbon Steel, Hook Attachment Type Swivel Eye, Working Load Limit 30,000 lb, Hook Opening 3 7/32 in, Hook Reach Length 16 23/32 in, Eye Inside Width 4 3/32 in, Eye Inside Height 3 3/4 in, Diameter 1 1/2 in, Red, Finish Painted, Includes Latch, Standards ASME B30.10

WHO’S YOUR PADDY?