Chain and Accessories

Working Load Limit permanently shown on every shackle.
Meets the design requirements of the following specification: Federal Specification RR-C-271, Type IVA, Grade A, Class 2

16” DUCTILE CHAIN PowerGrit Chain USE XL CHAIN

RATCHET LOAD BINDER 3/8-1/2 WLL: 9200lbs

5/16-3/8 RAT LOAD BINDER #5400 WLL

1/2” 7-1/2T SHUR-LOC SWVL HOOK W/BEARING

Campbell® Anchor Shackle, Series: 419-S, 35 ton, 2 in, 2-1/4 in Pin Dia, Screw Pin, 7-3/4 in Inner Length, 5-3/4 in Inner Width, 3-1/4 in Opening, 4-7/8 in Eye Outer Size, Drop Forged Carbon Steel Body, Alloy Steel Pin, Painted

Features

• Self colored (painted blue)
• Working load limit, size, manufacture name, date code and USA permanently marked on each shackle
• Statistically tested for impact resistance, tensile strength, hardness, ductility and fatigue
• 419 series shackles meet or exceed all manufacturing requirements of the ASME B30.26 “rigging hardware”, these include the material ductility requirement (Section 26-1.1.2), the design factor requirement (Section 26.1.2), the identification requirement (S
• 6:1 design factor
• Pins and bolts are heat treated and made of alloy steel
• Working load limit permanently shown on every shackle

PANEL LIFTING COLLAR

Working Load Limit permanently shown on every shackle
Meets the design requirements of the following specification:Federal Specification RR-C-271, Type IVA, Grade A, Class 2

Features

• Standard finish: Self-colored
• Design factor: 6 to 1
• Hackle Type: Screw Pin
• Size: 5/16 in.
• Standard Material: Drop-Forged Carbon Steel
• Working Load Limit: 3/4 Ton
• Finish: Painted Blue
• Weight Each: .18 lbs.
• Packaging: Industrial Box/Carton

Features

• Shackle Bodies Are Drop-Forged Carbon Steel
• Self Colored (Painted Blue)
• C-419-S Shackles Meet the Design Requirements of Federal Specification RR-C-271, Type IVA, Grade A, Class 2
• Working Load Limit, Size, Manufacture Name, Date Code and USA Permanently Marked on Each Shackle
• Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue
• 419 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B30.26 “Rigging Hardware”. These Include the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). the Shackles Can Be Proof Tested in Accordance with Section 26-1.4
• Certification Available Upon Request
• 6 to 1 Design Factor
• Pins and Bolts Are Heat-Treated and Made of Alloy Steel
• DO NOT EXCEED THE WORKING LOAD LIMIT
• Made in the USA

Shackle, Pin Style Screw, Working Load Limit 10,000 lb, Width Between Eyes 1 1/16 in, Pin Dia. 3/4 in, Body Size 5/8 in, Finish Hot Galvanized, Outside Diameter of Eye 1 1/2 in