Chain and Accessories

3/8X20 W/HKS BINDER CHAIN GRADE 70 TRANSPORT

Features

• Shackle Bodies Are Drop-Forged Carbon Steel
• Self Colored (Painted Blue)
• C-419-S Shackles Meet the Design Requirements of Federal Specification RR-C-271, Type IVA, Grade A, Class 2
• Working Load Limit, Size, Manufacture Name, Date Code and USA Permanently Marked on Each Shackle
• Statistically Tested for Impact Resistance, Tensile Strength, Hardness, Ductility and Fatigue
• 419 Series Shackles Meet or Exceed All Manufacturing Requirements of the ASME B30.26 ”Rigging Hardware”. These Include the Material Ductility Requirement (Section 26-1.1.2), the Design Factor Requirement (Section 26.1.2), the Identification Requirement (Section 26-1.5.1), and the Effective Temperature Range (Section 26-1.6.1). the Shackles Can Be Proof Tested in Accordance with Section 26-1.4
• Certification Available Upon Request
• 6 to 1 Design Factor
• Pins and Bolts Are Heat-Treated and Made of Alloy Steel
• DO NOT EXCEED THE WORKING LOAD LIMIT

Features

• Excellent general-purpose chain of standard commercial quality
• Frequently used for fabricating tow chains, binding or tie down chains
• Low carbon steel
• Proof tested
• Do not use for overhead lifting
• Container style: Drum
• Priced per foot

Features

• For use in load binding, towing and logging
• Can be used in accordance with Department of Transportation regulations
• Standard material: Heat-treated carbon steel
• Standard finish: Zinc electroplate and yellow chromate conversion coating
• Hallmarking: “C7” or “M7”
• Proof tested
• Do not use for overhead lifting
• Container style: Drum
• Priced per foot

Campbell® Binder Chain with Clevis Grab Hook, 5/16 in Trade, Load Capacity: 4700 lb, Grade: 70, Material Construction: Steel, Finish: Yellow Chromate Zinc Electroplated, 20 ft Length, Package Type: Drum

Features

• Chains may be used in accordance with the latest DOT regulations
• Grade 70 binder chains provide higher load to weight ratios
• Used to tie down or “bind” loads for transportation
• Made in USA

G70 TRANSPORT 5/16 X 10 W/ HOOKS

Campbell® Proof Coil Chain, Welded, Series: System 3, Single Loop/Straight Link, 30 Grade, 3/8 in, 400 ft Length, 2650 lb, Low Carbon Steel, Zinc Plated

Features

• 4:1 design factor
• Do not exceed the working load limit
• Do not use for overhead lifting
• Do Not use for overhead lifting
• Excellent low carbon steel chain for general purpose applications
• Excellent low carbon steel chain for general purpose applications
• Hallmarking – “C3” and “USA” on 5/16 in and larger
• Hallmarking: “C3” and “USA” on 5/16 in and larger
• Proof tested

Features

• Shackle Bodies Are Drop-Forged Carbon Steel
• Self Colored (Painted Blue)
• C-419-S Shackles Meet The Design Requirements Of Federal Specification Rr-C-271, Type Iva, Grade A, Class 2
• Working Load Limit, Size, Manufacture Name, Date Code And Usa Permanently Marked On Each Shackle
• Statistically Tested For Impact Resistance, Tensile Strength, Hardness, Ductility And Fatigue
• 419 Series Shackles Meet Or Exceed All Manufacturing Requirements Of The Asme B30.26 “Rigging Hardware”. These Include The Material Ductility Requirement (Section 26-1.1.2), The Design Factor Requirement (Section 26.1.2), The Identification Requirement (Section 26-1.5.1), And The Effective Temperature Range (Section 26-1.6.1). The Shackles Can Be Proof Tested In Accordance With Section 26-1.4
• Certification Available Upon Request
• 6 To 1 Design Factor
• Pins And Bolts Are Heat-Treated And Made Of Alloy Steel

Includes

1) Anchor Shackle

Working Load Limit permanently shown on every shackle
Meets the design requirements of the following specification:Federal Specification RR-C-271, Type IVA, Grade A, Class 2

Campbell® Anchor Shackle, Series: 419-S, 12 ton, 1-1/4 in, 1-3/8 in Pin Dia, Screw Pin, 4-1/2 in Inner Length, 3-1/4 in Inner Width, 2 in Opening, 3 in Eye Outer Size, Drop Forged Carbon Steel Body, Alloy Steel Pin, Painted

Features

• 6:1 design factor
• Pins and bolts are heat treated and made of alloy steel
• Pins and bolts are heat treated and made of alloy steel
• Self colored (painted blue)
• Statistically tested for impact resistance, tensile strength, hardness, ductility and fatigue
• Statistically tested for impact resistance, tensile strength, hardness, ductility and fatigue
• Working load limit permanently shown on every shackle
• Working load limit permanently shown on every shackle
• Working load limit, size, manufacture name, date code and USA permanently marked on each shackle

Notes

419 series shackles meet or exceed all manufacturing requirements of the ASME B30.26 “rigging hardware”, these include the material ductility requirement (Section 26-1.1.2), the design factor requirement (Section 26.1.2), the identification requirement (Section 26-1.5.1) and the effective temperature range (Section 26-1.6.1), the shackles can be proof tested in accordance with Section 26-1.4