Search Results

WARNING: This product is part of a personal fall arrest system. The user must read and follow the manufacturers instructions for each component of the system.These instructions must be provided to the user of this product. The user must read and understand these instructions before using this product. Manufacturers instructions must be followed for proper use and maintenance of this product. Alteration or misuse of this product, or failure to follow instructions may result in serious injury or death.

ANCHORAGE: The anchorage to which this product is attached must be capable of sustaining a static load in the direction applied by the personal fall arrest system of at least 3600 Ibs. With certification of a qualified person, or 5000 Ibs. without certification. When more than one personal fall arrest system is attached to the same structure, the strength requirements stated above must be multiplied by the number of personal arrest systems attached to the structure. PLAN your personal fall protection system before installing and using this equipment. Consider all factors affecting your safety during use of this equipment.

CAUTION: BEWARE OF PENDULUM SWINGS TO AVOID STRIKING AN OBJECT OR CONTACT WITH A LOWER LEVEL, FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT IN SERIOUS INJURY.

Industrial Work Day aerosol paints offer an economical solution to marking, color coding and miscellaneous spray paint needs where long term quality and durability are not required. For use on ceramic, plaster, glass, metal, wood and more. Krylon Industrial Work Day spray paint dries to the touch in 12 minutes.

Quik-Mark™ Solvent-Based Inverted Marking. Paint offers an advanced UV resistant formula. Our formula allows you to mark your lines during harsh or adverse conditions, even in extreme sun, Quik-Mark™ advanced UV resistant formulas will not fade to a different color! Accuracy, speed and ease of marking. will keep your locators efficient and productive while lowering the overall costs of a ticket.. Total marking paint performance eliminates costly remarking, clogged and wasted cans, and allows marking with confidence in any weather conditions.. Both APWA and Fluorescent colors are available in water-based and solvent-based formulations, in a variety of sizes. One-coat coverage and our Spray-Thru™ cap allow for inverted painting ease. Use on concrete, pavement, gravel, grass, brick, asphalt, athletic fields, utility, excavation, ground surveying and construction marking.

Features

• One pass valve for bold, bright, visible markings
• Glove Grip™ cap has a 50% wider opening to easily accommodate work gloves
• Spray-Thru™ cap – non-clogging spray tip
• Locking tip won’t fall off with extended use
• Fast drying formula penetrates and adheres to hot, cold or wet surfaces
• VOC/MIR compliant

APPLICATION CONDITIONS

• For best results use when can is between 70-80°F.
• Shake can well until mixing ball breaks loose.
• Hold can at top and swing bottom of can in a circle until ball travels freely (repeat during extended use).
• To spray, invert can and point spray button 4-6 inches above surface.
• Press button to the side to actuate.
• Use with Krylon Marking Wands (K07095 and K07096) to reduce back strain and obtain consistent writing, stenciling and marking.
• When using marking wands, follow shaking instructions, then insert can and pull trigger to spray.

Performance

• High-solids formulation for bold, bright, visible markings
• Fast-drying formula penetrates and adheres to hot and cold surfaces
• Convenient Spray-Thru™ cap
• Non-clogging Spray tip

CIRC SAW BL 6-1/2 40 CBD T CIRC SAW BL 6-1/2 40 CBD T replaces 48-40-4112

CIRC SAW BL DRY CUT 14” 90T CIRC SAW BL DRY CUT 14” 90T can sub dew dwa7745

M18 Angler 100’ Replacement Cartridge

M18 REDLITHIUM HIGH OUTPUT HD12.0 STARTE M18 REDLITHIUM HIGH OUTPUT HD12.0 STARTER KIT

REDLITHIUM USB BATTERY & CHARGER KIT

SPLINE/ROUNDHEX 1 X 12” FLAT CHISEL

SDS+ 5/8“x10” Ground Rod Driver