Filter Your Search
Shop by Category
Search Results
16 OZ ALL-4 AEROSOL - AER 7340
Aervoe All-4 Multi Purpose Spray; Container Size: 16 oz.; Container Type: Aerosol Can; Color: Clear Light Yellow; Contains: Aliphatic Petroleum Distillates; Odor/Scent: Mild Hydrocarbon; Base Type: Aliphatic Petroleum Distillates, Mineral Oil; Flash Point: 172 to 175°F; Dielectric Strength: >33 kV/mm; Specific Gravity: 0.810; Temperature Rating: 40 to 110°F Operating; VOC: 70% For Aerosol
Features
- All-4 displaces moisture, cleans, penetrates, lubricates, and protects. Low surface tension yields complete penetration and permits the lubricant to travel easily into small cracks and along threaded fasteners.
- It displaces moisture and penetrates deep to loosen scale and rust on frozen or sticking parts.
- Silicone free
- Used to clean, penetrate, lubricate, protect
- Displaces moisture
- Cleans away dirt and grease
- No gummy residue
- Fills microscopic irregularities on surfaces
SPRAY ADHESIVE,AERSOL - AER 8177
Materials Bonded Cardboard, Metal, Paper, Wood, Container Type – Adhesives Aerosol Can, Container Size – Adhesives 20.0 oz, Temperature Range – Adhesives 50 Degrees to 90 Degrees F, Begins to Harden – Adhesives 1 to 3 min, Full Cure Time – Adhesives 30 min, Temporary or Permanent Bonding, Remove Within 30 sec for Temporary, CARB, Bonding Range 5 to 30 min, Adhesive, Industrial Adhesive
3/16 CHAIN 1000 FT PER DRUM - CAM 0120322
Coil Link Chain – 3/16 in, Grade 30 Zinc Plated Low Carbon Steel, 800 lbs Capacity, 0.21 in Link Dia., 1000 ft
SEAL OFF 1/2 TO 1-1/4% - COND 08039700
CONDUX 08039700 SEAL OFF,POWER DART 0.50-1.25
WHEELBARROW 6 CU FT HD W/KNOBBY TIRE - COR WB 2706
Features
- 0.05 inch Wrinkle-free extra-heavy-duty, solid steel tray
- 1.8 inches squared wooden handles for added strength for larger loads
- Built-in leg stabilizers adds improved tipping resistance
- Bolt-through design with squared & recessed bolt holes
- Bolted cross-brace design helps legs sustain heavier loads
- Reinforced steel front tray braces for added support and stability
- 4-Ply, knobby tire for added traction and longer wear
- Ball bearings for years of smooth performance and grease fittings for easy lubricating
electrical conn - CROUSE APJ6485
Eaton Crouse-Hinds series Arktite APJ plug, 60A, 0.50-1.45”, Three-wire, four-pole, 50-400 Hz, Style 2, Copper-free aluminum, 600 Vac/250 Vdc
Applications
- For Industrial Use
DeWalt 1800 Watt Portable Power Station & Simultaneous Battery Charger
The 1800 Watt Portable Power Station™ and Simultaneous Battery Charger allows for AC power in remote locations for convenient portable power. Able to run most corded tools, it provides 1800 Watts (15 amps) continuous power and 3600 Watts peak power. The DCB1800B runs on four DEWALT 20V MAX* batteries (including FLEXVOLT), and for high power applications, four 20V MAX* 3.0Ah DEWALT Batteries (DCB200) or higher amp hour are recommended to provide the best results. Not only can the 1800 Watt Portable Power Station™ power a corded tool remotely, but it also becomes a multi-port simultaneous charger for up to four DEWALT 20V MAX* Batteries (including FLEXVOLT) when plugged into a wall outlet via extension cord (batteries and extension cord sold separately).
Squids 3700 Web Tool Tether Attachment, 2X-Large, D-Ring Tool Tails, 2lbs (6-Pack)
Squids 3700 Web Tool Tether Attachments (6-Pack) act as a retrofit attachment point on tools, belts, harnesses or structures that can be used to tether small hand tools up to 2lbs // 0.9kg and prevent dropped or falling objects from occurring on the job.
Built for secure attachment to tools, this anchor attachment is made of heavy-duty nylon webbing and high-tensile strength nylon thread. Both ends feature a reinforced double stitch web catch for a more durable stop. Once the base of the tail is securely taped to the tool or anchor point, the plated D-ring acts as a captive hole for tethering tool lanyards.
For best use, tape the loop end of the tool tail with Squids Self-Adhering Tape. Available in three sizes: short, medium, long, x-long and 2X-long. When working at-heights, it’s essential to tether your tools. Fall protection lanyards and tethers are pieces of safety equipment designed to attach one end securely to a fixed anchor point, and the other to an appropriate attachment point on a tool by proper tethering.
3/4" DR HEX BIT REPAIR KIT - 7/8" - PROT J075907/8RK
Features
- 3/4” drive hex bit repair kit.
- 7/8” size.
- 0.62 lbs.
REPAIR KIT F/ 3/4DR 9/16IN - PROT J075909/16RK
Features
- 3/4” drive hex bit repair kit.
- 9/16” size.
- 0.18 lbs.