Search Results

Features

• Retaining rings are used to help secure sockets onto drive tools.
• They are not intended to bear any load.
• The rotational forces are between the drive tool and the socket.
• The resin crush gauge on the pin helps indicate when a socket is excessively worn and should be replaced.
• Drive tool and socket should line up when in use and should not pinch the crush gauge.
• Cracked sockets and or worn drive tools cause each other to turn excessively in relation to each other. This action pinches the small fin or the crush gauge on these retaining rings. If the crush gauge is pinched, it is an indication that the socket and or the drive tool need to be replaced.
• One-piece construction, no loose parts. Pin is made of resin which allows the material to compress without breaking.
• Part numbers are embossed on the rings near the point at which the pin and ring meet.

Aervoe All-4 Multi Purpose Spray; Container Size: 16 oz.; Container Type: Aerosol Can; Color: Clear Light Yellow; Contains: Aliphatic Petroleum Distillates; Odor/Scent: Mild Hydrocarbon; Base Type: Aliphatic Petroleum Distillates, Mineral Oil; Flash Point: 172 to 175°F; Dielectric Strength: >33 kV/mm; Specific Gravity: 0.810; Temperature Rating: 40 to 110°F Operating; VOC: 70% For Aerosol

Features

• All-4 displaces moisture, cleans, penetrates, lubricates, and protects. Low surface tension yields complete penetration and permits the lubricant to travel easily into small cracks and along threaded fasteners.
• It displaces moisture and penetrates deep to loosen scale and rust on frozen or sticking parts.
• Silicone free
• Used to clean, penetrate, lubricate, protect
• Displaces moisture
• Cleans away dirt and grease
• No gummy residue
• Fills microscopic irregularities on surfaces

Materials Bonded Cardboard, Metal, Paper, Wood, Container Type – Adhesives Aerosol Can, Container Size – Adhesives 20.0 oz, Temperature Range – Adhesives 50 Degrees to 90 Degrees F, Begins to Harden – Adhesives 1 to 3 min, Full Cure Time – Adhesives 30 min, Temporary or Permanent Bonding, Remove Within 30 sec for Temporary, CARB, Bonding Range 5 to 30 min, Adhesive, Industrial Adhesive

Features

• Packaged Replacement Die 3/4” (19.0 mm) Conduit Size for Standard Round Knockout Punches. Actual Hole Size 1.115” (28.3 mm)
• Made in USA
• Alignment Markings improve punching accuracy and productivity
• Punches and dies are clearly marked for quick part identification

Applications

For 1.115 IN (28.300 MM) Actual Hole Size Standard Round Knockout Punches

Eaton Crouse-Hinds series Arktite APJ plug, 60A, 0.50-1.45”, Three-wire, four-pole, 50-400 Hz, Style 2, Copper-free aluminum, 600 Vac/250 Vdc

Applications

For Industrial Use

This OSHA Table 1-compliant Dust Box Assembly features a filter cleaning mechanism and a HEPA filter. It retrofits onto the D25303D and attaches to the DWH303DH and the DWH304DH as a replacement filter assembly. The durable and clear high-capacity dust box allows the user to see when to empty. The high-efficiency HEPA filter removes 99.97% of airborne particles 0.3 microns or greater. Labels on the outside of the dust box call out the HEPA filter and the OSHA 1926.1153 compliance.

Squids 3700 Web Tool Tether Attachments (6-Pack) act as a retrofit attachment point on tools, belts, harnesses or structures that can be used to tether small hand tools up to 2lbs // 0.9kg and prevent dropped or falling objects from occurring on the job.

Built for secure attachment to tools, this anchor attachment is made of heavy-duty nylon webbing and high-tensile strength nylon thread. Both ends feature a reinforced double stitch web catch for a more durable stop. Once the base of the tail is securely taped to the tool or anchor point, the plated D-ring acts as a captive hole for tethering tool lanyards.

For best use, tape the loop end of the tool tail with Squids Self-Adhering Tape. Available in three sizes: short, medium, long, x-long and 2X-long. When working at-heights, it’s essential to tether your tools. Fall protection lanyards and tethers are pieces of safety equipment designed to attach one end securely to a fixed anchor point, and the other to an appropriate attachment point on a tool by proper tethering.

Coil Link Chain – 3/16 in, Grade 30 Zinc Plated Low Carbon Steel, 800 lbs Capacity, 0.21 in Link Dia., 1000 ft

CONDUX 08039700 SEAL OFF,POWER DART 0.50-1.25

Features

• 0.05 inch Wrinkle-free extra-heavy-duty, solid steel tray
• 1.8 inches squared wooden handles for added strength for larger loads
• Built-in leg stabilizers adds improved tipping resistance
• Bolt-through design with squared & recessed bolt holes
• Bolted cross-brace design helps legs sustain heavier loads
• Reinforced steel front tray braces for added support and stability
• 4-Ply, knobby tire for added traction and longer wear
• Ball bearings for years of smooth performance and grease fittings for easy lubricating