Abrasive Accessories

The Bosch 18SG-5E Surface Grinding Dust-Extraction Guard works with the Bosch 4-1/2 In. and 5 In. angle grinders. The guard and grinder can be part of the end-to-end Bosch PRO+GUARD™ Protection System, along with attachments, dust extractor and respiration protection (to be used as a basic summary; always use products in accordance with the owner’s manual and OSHA Rule 1926.1153 Table 1). This attachment is tool free, with a removable nose piece and a replaceable brush ring for low cost maintenance. 1800 Series 4-1/2” & 5” Grinders

The HDC200 is a flexible dust collection attachment for SDS-plus® and SDS-max® hammers for drilling into concrete. It is optimized for drilling diameters from 5/8 In. to 1-3/8 In. but can accommodate up to 2-1/2 In. if the brush ring is removed. The attachment features two unique air chambers: one allows the drilling bit to pass through when drilling into the work surface. The second air chamber is designed to maintain suction to the wall during the drilling application. The dust port is designed for Bosch 1-3/8 In. vacuum nozzle but can be used with either 1-1/4 In. or 2 In. vacuum nozzles when used with the appropriate adapter. The system is universal and is designed to connect to a vacuum so that it can be used with any size hammer and can accommodate the full range of drill bit diameters and drilling depth.

Features

• Dual air chambers provide for both dust collection during use and provide suction to the wall
• Dust port fits Bosch 1-3/8 In. vacuum nozzle and can convert to 1-1/4 In./2 In. hose nozzles
• Replaceable brush ring provides seal for multiple bit diameters
• Rubber seal maintains suction to wall

Includes

Dust collection attachment with universal vacuum adapter

Features

• All Greenlee knockout tools are made in the USA
• 3.000 Round Replacement Punch
• Alignment Markings improve punching accuracy and productivity when making holes.
• Punches and dies are marked with catalog numbers and sizes for quick part identification.

Applications

Use with battery-powered, hydraulic, ratchet or manual drivers. Capacity up to 10 gauge mild steel. Use on mild steel, aluminum, fiberglass and plastic.

Features

• Easy threading – “dog point” tip helps eliminate cross-threading
• Hex key access for easy removal from tool
• Laser markings for quick part identification
• Use with Greenlee Quick Draw® hydraulic knockout drivers
• Use with Greenlee punches and dies
• Made in the USA
• Replaces 31872

Applications

For 3/4” – 2” conduit size Slug-Buster® and Standard Round knockouts. Use with Greenlee Quick Draw® manual-hydraulic knockout drivers.

Features

• Durable split-point tip for fast, accurate material penetration.
• Patented split-step design optimizes chip load for fast, smooth cutting, and more holes per charge.
• Progressive cutting edges provides power tool accessory balanced aggression to maximize torque efficiency and minimize stalling.
• Improved double flute design for superior chip evacuation, cutting speeds and tool life.
• Three-flat shank for all 1/2” drill chucks
• Laser markings for quick, easy product and size identification.
• Replaced 30008
• Also available for sale in a carton, qty. 25 (Cat #: GSB09-B UPC #: 783310082071)

Applications

Cuts mild steel, aluminum, brass, copper, wood, fiberglass, plastics and laminates

Features

• LiHD battery packs for ultimate performance and extremely long use with minimum temperature change
• Intelligent battery management for long-lasting battery packs with a 3 year guarantee
• Patented “AIR COOLED“ charging technology
• Permanent electronic Electronic Single Cell Protection (ESCP) when charging, for particularly long life.
• Processor-controlled charge and discharge management
• Capacity display to permanently monitor charge status
• Can be stored for long periods of time with almost no self-discharge
• Multiple brands, one battery pack system: This battery pack is compatible with all 18 V machines and chargers from CAS brands: www.cordless-alliance-system.com

The RIDGID 33057 2 1/2 in. to 4 in. NPT Pipe Dies, High Speed for Stainless Steel, are designed for use with model 1224 Threading Machines. The high-speed for stainless steel dies have a pipe threading capacity of 2 1/2 in. through 4 in.

RIDGID 50012 1/2”-3/4” NPT (Nominal Pipe Size) – 14 TPI (Threads Per Inch). These Pipe Dies are for use in universal die heads (Nos. 504A, 711, 713, 811A, 815A, 816, 817 and 842). The dies are high-speed and designed for Plastic Coated Pipe and right hand cutting of threads.

25IN BAR 3/8 .050 NULL

AL500 AP HIGH SPEED CHARGER