Abrasive Accessories

The Bosch 18SG-5E Surface Grinding Dust-Extraction Guard works with the Bosch 4-1/2 In. and 5 In. angle grinders. The guard and grinder can be part of the end-to-end Bosch PRO+GUARD™ Protection System, along with attachments, dust extractor and respiration protection (to be used as a basic summary; always use products in accordance with the owner’s manual and OSHA Rule 1926.1153 Table 1). This attachment is tool free, with a removable nose piece and a replaceable brush ring for low cost maintenance. 1800 Series 4-1/2” & 5” Grinders

Features

• Use to pull in 2 IN (50.8 mm) or larger conduit
• Type of pulls: heavy, long runs
• Type of grip: Flexible eye 1/4 IN (6.4 mm-629) (6.3 mm-504) diameter galvanized steel aircraft cable connected to 2 cable receptacles with 5/8 IN (15.9 mm) diameter opening and 2 clamping set screws
• Select pulling grips with a maximum-rated capacity that meets or exceeds the cable pulling tool’s maximum pulling force
• Minimum cable diameter is 3/8 IN

Applications

Electrical Cable pull

50FT GROUND CABLE 700 SERIES JEEPERS

CHARGER F/785 BATTERY

• Ajax Chipping Hammer Chisels are manufactured from both alloy and carbon steel.
• These chisels are available in various shank styles, blade widths, and lengths.
• This class of tools are used in 15 lb.
• Pneumatic chipping hammers to cut or chip metal or concrete.
• Standard Duty Lock Springs

• Petrochemical Plants and Oil Refineries use these tools to separate pipe flanges and re-align pipe flanges in their assembly and maintenance operations.
• Manufacturing Plants use these tools for lifting and aligning machinery.
• Steel Fabricators use these tools in the alignment of steel plate prior to welding.
• z12 in (304.8 mm); 2 in (50.8 mm) Height; 2 in (50.8 mm) Width; Stock Wedge

The HDC200 is a flexible dust collection attachment for SDS-plus® and SDS-max® hammers for drilling into concrete. It is optimized for drilling diameters from 5/8 In. to 1-3/8 In. but can accommodate up to 2-1/2 In. if the brush ring is removed. The attachment features two unique air chambers: one allows the drilling bit to pass through when drilling into the work surface. The second air chamber is designed to maintain suction to the wall during the drilling application. The dust port is designed for Bosch 1-3/8 In. vacuum nozzle but can be used with either 1-1/4 In. or 2 In. vacuum nozzles when used with the appropriate adapter. The system is universal and is designed to connect to a vacuum so that it can be used with any size hammer and can accommodate the full range of drill bit diameters and drilling depth.

Features

• Dual air chambers provide for both dust collection during use and provide suction to the wall
• Dust port fits Bosch 1-3/8 In. vacuum nozzle and can convert to 1-1/4 In./2 In. hose nozzles
• Replaceable brush ring provides seal for multiple bit diameters
• Rubber seal maintains suction to wall

Includes

Dust collection attachment with universal vacuum adapter

3/4 × 5-1/2 Draw Stud

Applications

For 744 Slug-Splitter SC Knockout Punch Kit

Features

• Greenlee-approved hydraulic oil
• Specially compounded for use with Greenlee hydraulic equipment
• Refinery-filtered to give you the finest oil available

Applications

For Use With Greenlee Hydraulic Equipment

Features

• Compact, Lightweight Design – for portability and fast, easy one-person operation
• Slug-Buster® punch profile splits slugs for easy slug removal
• Knurled edge on punches for better grip
• New die design optimized for widest range of materials and drivers
• Laser markings for quick part identification. Alignment markings for improved accuracy.
• Knockout set is easy to thread – draw studs with “dog point” tip helps eliminate cross-threading. Hex key access for easy removal from tool
• Compatibility – works with all Greenlee knockouts. Same draw studs used with Intelli-PUNCH™, LS50L2 and 746A ram
• Punches, dies, draw studs and case made in the USA
• Driver manufactured in the USA from US and global components

Applications

For punching holes in mild steel, stainless steel, aluminum, brass, copper, fiberglass and plastics