Paint

Aervoe Zynolyte® Speed E-Namel™ Speed Enamel; Color: Rich Red; Finish: Gloss; Net Weight: 11 oz.; Container Size: 16 oz.; Container Type: Aerosol Can; Coverage: Theoretical at 1 mil Dry: 13 sq. ft./can, Practical at 1/2 mil Dry: 26 sq. ft./can; Dry Time: 72 hr.; Dry Time Recoat: Before 2 hr. or After 72 hr.; Dry Time Tack Free: Touch: 15 min., Handle: 30 min.; Base Type: Solvents; Resin Type: Acrylic VT Alkyd; Application Temperature: 60 to 80°F; Exposure Conditions: Interior/Exterior

Features

• The fast-dry quality finish that flies off the shelf, this all purpose enamel coating is formulated for interior and exterior use on a variety of surfaces, a superior quality, tough, durable finish that prevents rust and dries in minutes.
• Good gloss and hide coverage
• Protects metal and wood surfaces from rust and corrosion
• Dry to the touch in 15 min.
• Get a smooth, professional finish every time

Tough Coat® provides the ultimate in durability and protective finishes. This high- solids formula ensures maximum coverage and performance.. Tough Coat Acrylic Akyd Enamels features our exclusive EZ TOUCH® FANSPRAY® Nozzle. This patented valve sprays a horizontal or vertical pattern and requires 50% less finger pressure than any other paint valve. A high-solids formula ensures maximum coverage and performance. Tough Coat delivers the ultimate in protection, durability, high gloss and color retention.

Features

• Tough, protective coating
• Resists chipping and peeling
• Specially formulated for a variety of industrial applications
• Ideal for light to heavy-duty painting projects

APPLICATION CONDITIONS

• Use at 70°F for best operation. Shake can for 2 minutes after ball within begins to rattle.
• Repeat for 10 seconds after each minute of use.
• Test spray on inconspicuous area or scrap piece to check compatibility.
• For a smooth, professional finish, spray 6” to 8” from surface in a sweeping motion.
• Avoid runs and drips by applying several thin coats, rather than one heavy coat.
• Dries to touch in 15 minutes. Can be handled in 1 to 2 hours.
• Can be recoated before 1 hour or after 2 hours.
• EZ TOUCH® FANSPRAY® NOZZLE: You get professional-looking results with the EZ TOUCH FANSPRAY.
• It takes half as much finger pressure.
• The FANSPRAY covers better with less overspray.
• Change spray direction just by turning the square insert.

Performance

• Specially formulated for a variety of industrial applications
• Ideal for light- to heavy-duty painting projects, both indoors and outdoors
• Tough, protective coating resists chipping and peeling
• Dries to touch in 15 minutes
• Features the EZ TOUCH® FANSPRAY® Nozzle

FLUORESCENT YELLOW/ORANGE OLD # 3102

Quik-Mark™ Solvent-Based Inverted Marking. Paint offers an advanced UV resistant formula. Our formula allows you to mark your lines during harsh or adverse conditions, even in extreme sun, Quik-Mark™ advanced UV resistant formulas will not fade to a different color! Accuracy, speed and ease of marking. will keep your locators efficient and productive while lowering the overall costs of a ticket.. Total marking paint performance eliminates costly remarking, clogged and wasted cans, and allows marking with confidence in any weather conditions.. Both APWA and Fluorescent colors are available in water-based and solvent-based formulations, in a variety of sizes. One-coat coverage and our Spray-Thru™ cap allow for inverted painting ease. Use on concrete, pavement, gravel, grass, brick, asphalt, athletic fields, utility, excavation, ground surveying and construction marking.

Features

• One pass valve for bold, bright, visible markings
• Glove Grip™ cap has a 50% wider opening to easily accommodate work gloves
• Spray-Thru™ cap – non-clogging spray tip
• Locking tip won’t fall off with extended use
• Fast drying formula penetrates and adheres to hot, cold or wet surfaces
• VOC/MIR compliant

APPLICATION CONDITIONS

• For best results use when can is between 70-80°F.
• Shake can well until mixing ball breaks loose.
• Hold can at top and swing bottom of can in a circle until ball travels freely (repeat during extended use).
• To spray, invert can and point spray button 4-6 inches above surface.
• Press button to the side to actuate.
• Use with Krylon Marking Wands (K07095 and K07096) to reduce back strain and obtain consistent writing, stenciling and marking.
• When using marking wands, follow shaking instructions, then insert can and pull trigger to spray.

Performance

• High-solids formulation for bold, bright, visible markings
• Fast-drying formula penetrates and adheres to hot and cold surfaces
• Convenient Spray-Thru™ cap
• Non-clogging spray tip

BRIGHT GOLD METALLIC OLD # 1701

ALUMINUM SILVER SPRAY PAINT

GREEN PAINT FLOR GREEN MARKING SPRAY PAINT 17 FL OZ

YELLOW PAINT CAUTION YELLOW SPRAY PAINT 17 FL OZ

Quik-Mark™ Water-Based Inverted Marking. Paint offers an advanced UV resistant formula. Our formula allows you to mark your lines during harsh or adverse conditions, even in extreme sun, Quik-Mark™ advanced UV resistant formulas will not fade to a different color! Accuracy, speed and ease of marking. will keep your locators efficient and productive while lowering the overall costs of a ticket.. Total marking paint performance eliminates costly remarking, clogged and wasted cans, and allows marking with confidence in any weather conditions.. Both APWA and Fluorescent colors are available in water-based and solvent-based formulations, in 16-oz., 20-oz. and our 25-oz. size cans. One-coat coverage and our Spray-Thru™ cap allow for inverted painting ease. Use on concrete, pavement, gravel, grass, brick, asphalt, athletic fields, utility, excavation, ground surveying and construction marking.

Features

• One pass valve for bold, bright, visible markings
• Glove Grip™ cap has a 50% wider opening to easily accommodate work gloves
• Spray-Thru™ cap – non-clogging spray tip
• Locking tip won’t fall off with extended use
• Fast drying formula penetrates and adheres to hot, cold or wet surfaces
• VOC/MIR compliant

APPLICATION CONDITIONS

• For best results use when can is between 70-80°F.
• Shake can well until mixing ball breaks loose.
• Hold can at top and swing bottom of can in a circle until ball travels freely (repeat during extended use).
• To spray, invert can and point spray button 4-6 inches above surface.
• Press button to the side to actuate.
• Use with Krylon Marking Wands (K07095 and K07096) to reduce back strain and obtain consistent writing, stenciling and marking.
• When using marking wands, follow shaking instructions, then insert can and pull trigger to spray.

Performance

• High-solids formulation for bold, bright, visible markings
• Fast-drying formula penetrates and adheres to hot and cold surfaces
• Convenient Spray-Thru™ cap
• Non-clogging Spray tip

• The Aervoe Zynolyte Hi-Temp Paint (6-Pack) is a flame-resistant paint specifically formulated for use on all metal surfaces that are exposed to extreme heat such as mufflers, incinerators, engine manifolds, and space heaters. It produces a tough, hardened coating that can withstand temperatures up to 1200 degrees Fahrenheit (538 degrees Celsius) while providing excellent protection against corrosion and pitting.
• Ideal for both indoor and outdoor applications, this Aervoe high-temperature paint offers resistance against gasoline, salt spray, oil, grease, and other elements. It is fast-drying and dries to touch within 30 minutes. Once dried, it eliminates chipping, peeling, and even discoloration ensuring long-lasting service. To meet most coating specifications, it comes in four color variations including aluminum, black, machinery gray, and white.
• The Aervoe Zynolyte Hi-Temp Paint (6-Pack) is available in 11-ounce container. Each case includes six cans of paint. It comes with a one-year manufacturer’s warranty for guaranteed reliable performance.

Features

• Choice of 4 colors
• Six 11-oz cans in one case
• Flame-resistant formulation
• Withstands temperatures up to 1200°F (538°C)
• Protects against corrosion and pitting
• Provides tough, hardened coating
• Resists gasoline, salt spray, oils, greases, & more
• Dries to touch in 30 minutes
• Ideal for interior and exterior applications
• Perfect for all metal surfaces exposed to extreme heat
• 1-year manufacturer’s warranty