Paint

Krylon® Industrial Acryli-Quik™ is specifically formulated for industrial maintenance and touch-up applications. Performance is exceptional, and the broad selection includes interior/exterior acrylic lacquers, primers and specialty paints. Acryli-Quik™ provides a high-solids, fast-drying formula.. No Runs, No Drips, No Errors!™. These paints are specifically formulated for industrial maintenance and touch-up applications. Performance is exceptional, and the broad selection includes interior/exterior acrylic lacquers, primers, and specialty paints. Acryli-Quik aerosols provide all of the superior characteristics that customers have come to expect from our brand. We offer high solids, fast-drying times and an excellent appearance. No Runs, No Drips, No Errors!®

APPLICATION CONDITIONS

• Use at 70°F for best operation.
• Shake can until ball rattles for 1 minute.
• Test spray on inconspicuous area or scrap piece to check compatibility.
• Hold container upright 10-12 inches from surface.
• Do not apply with a continuous spray.
• To avoid runs apply several thin coats. Dries to touch in 12 minutes.
• Can be recoated at anytime.

Performance

• No recoat window, recoat anytime
• Dries to touch in 8 minutes
• Hard, protective, durable finish
• High-gloss finish

SAFETY RED Solvent Based

Aervoe Striping Paint; Color: Traffic White; Finish: Semi-Gloss; Net Weight: 18 oz.; Container Size: 20 oz.; Container Type: Aerosol Can; Coverage: Theoretical at 1/2 mil Dry (4 Inch Wide Stripe): 144 linear ft./can, Practical at 1 mil Dry (4 Inch Wide Stripe): 72 linear ft./can; Dry Time: 8 hr.; Dry Time Recoat: 30 min.; Base Type: Solvents; Resin Type: Acrylic VT Alkyd; Application Temperature: 50 to 90°F; Exposure Conditions: Interior/Exterior

Features

• Uniquely formulated to adhere to a variety of surfaces, especially asphalt and concrete.
• Aervoe Striping Paint formulas offer excellent resistance to traffic and oil.
• Application is via a line striping machine, which will allow the line width to be adjusted from 2 to 4 inch.
• Asphalt black available to correct mistakes or cover existing lines
• Durable, long-lasting stripe
• Excellent resistance to traffic, oil and gasoline
• Fast drying – 5 min. to touch
• High-visibility colors
• Non-clogging spray tip
• One case of aerosol paint will yield a 4-Inch stripe approximately 700 linear feet

GLOSS WHITE SPRAY PAINT SPEED E-NAMEL QUICK DRYING, RUST PREVENTIVE, HARD FINISH

Krylon marking paint comes in grey primer, has a gloss finish and is packaged 1 per package.

SCHOOL BUS YELLOW OLD # 1809

Quik-Mark™ Solvent-Based Inverted Marking. Paint offers an advanced UV resistant formula. Our formula allows you to mark your lines during harsh or adverse conditions, even in extreme sun, Quik-Mark™ advanced UV resistant formulas will not fade to a different color! Accuracy, speed and ease of marking. will keep your locators efficient and productive while lowering the overall costs of a ticket.. Total marking paint performance eliminates costly remarking, clogged and wasted cans, and allows marking with confidence in any weather conditions.. Both APWA and Fluorescent colors are available in water-based and solvent-based formulations, in a variety of sizes. One-coat coverage and our Spray-Thru™ cap allow for inverted painting ease. Use on concrete, pavement, gravel, grass, brick, asphalt, athletic fields, utility, excavation, ground surveying and construction marking.

Features

• One pass valve for bold, bright, visible markings
• Glove Grip™ cap has a 50% wider opening to easily accommodate work gloves
• Spray-Thru™ cap – non-clogging spray tip
• Locking tip won’t fall off with extended use
• Fast drying formula penetrates and adheres to hot, cold or wet surfaces
• VOC/MIR compliant

APPLICATION CONDITIONS

• For best results use when can is between 70-80°F.
• Shake can well until mixing ball breaks loose.
• Hold can at top and swing bottom of can in a circle until ball travels freely (repeat during extended use).
• To spray, invert can and point spray button 4-6 inches above surface.
• Press button to the side to actuate.
• Use with Krylon Marking Wands (K07095 and K07096) to reduce back strain and obtain consistent writing, stenciling and marking.
• When using marking wands, follow shaking instructions, then insert can and pull trigger to spray.

Performance

• High-solids formulation for bold, bright, visible markings
• Fast-drying formula penetrates and adheres to hot and cold surfaces
• Convenient Spray-Thru™ cap
• Non-clogging Spray tip

Quik-Mark™ Solvent-Based Inverted Marking. Paint offers an advanced UV resistant formula. Our formula allows you to mark your lines during harsh or adverse conditions, even in extreme sun, Quik-Mark™ advanced UV resistant formulas will not fade to a different color! Accuracy, speed and ease of marking. will keep your locators efficient and productive while lowering the overall costs of a ticket.. Total marking paint performance eliminates costly remarking, clogged and wasted cans, and allows marking with confidence in any weather conditions.. Both APWA and Fluorescent colors are available in water-based and solvent-based formulations, in 16-oz., 20-oz. and our 25-oz. size cans. One-coat coverage and our Spray-Thru™ cap allow for inverted painting ease. Use on concrete, pavement, gravel, grass, brick, asphalt, athletic fields, utility, excavation, ground surveying and construction marking.

Features

• One pass valve for bold, bright, visible markings
• Glove Grip™ cap has a 50% wider opening to easily accommodate work gloves
• Spray-Thru™ cap – non-clogging spray tip
• Locking tip won’t fall off with extended use
• Fast drying formula penetrates and adheres to hot, cold or wet surfaces
• VOC/MIR compliant

APPLICATION CONDITIONS

• For best results use when can is between 70-80°F.
• Shake can well until mixing ball breaks loose.
• Hold can at top and swing bottom of can in a circle until ball travels freely (repeat during extended use).
• To spray, invert can and point spray button 4-6 inches above surface.
• Press button to the side to actuate.
• Use with Krylon Marking Wands (K07095 and K07096) to reduce back strain and obtain consistent writing, stenciling and marking.
• When using marking wands, follow shaking instructions, then insert can and pull trigger to spray.

Performance

• High-solids formulation for bold, bright, visible markings
• Fast-drying formula penetrates and adheres to hot and cold surfaces
• Convenient Spray-Thru™ cap
• Non-clogging Spray tip

Industrial Work Day aerosol paints offer an economical solution to marking, color coding and miscellaneous spray paint needs where long term quality and durability are not required. For use on ceramic, plaster, glass, metal, wood and more. Krylon Industrial Work Day spray paint dries to the touch in 12 minutes.

Solvent Base Spray Paint – Survey Marking Blue, 19 oz Container Size, Solvent, Exterior, Alkyd Enamel, 740 ft Coverage Range, 8 hrs Dry Time

Features

• Spray on any surface
• Self-cleaning tip
• Mark lasts 2 months
• Meets standards set by OSHA and APWA/ONE Call Systems