Fuel

MOTO4PLUS 1 GALLON NOT FOR USE IN PRODUCTS THAT REQUIRE FUEL-OIL MIXTURE!!!!

NO SPILL 5 GALLON GAS CAN

FILL-RITE® Transfer Pump, Portable, 10 gpm, 3/4 in NPT Inlet, 1 in FNPT Outlet, 1/5 hp, 12 VDC, 17 A, 3800 rpm Motor, Ball Bearing, Manual Nozzle, 3/4 in, 8 ft Hose Length, 6-1/2 ft Cord, Cast Iron Housing, Buna-N Seal, Cast Iron/Polypropylene, Mechanical Seal, 7-1/8 in L x 5-1/8 in W x 3-3/4 in H

Features

• This Fill-Rite® diesel fuel transfer pump delivers diesel fuel or antifreeze
• Diesel and anti-freeze
• 30 min duty cycle
• Bypass valve

12V DC, 20 GPM heavy duty, cast-iron, rotary vane fuel transfer pump. Designed for gasoline, diesel, biodiesel up to B20, E15, kerosene and mineral spirits. Includes pump, 1” ultra high flow automatic nozzle, 1” x 12” hose with static ground wire, 18’ battery cable with clamps, 20”-34” steel telescoping suction pipe, and 4-digit mechanical meter. UL/cUL, ATEX, CE motor. Two-year warranty. Made in USA.

Features

• 20 GPM (76 LPM)
• UL listed motor
• Heavy duty cast iron
• Diesel, Gasoline, Kerosene, E15, Biodiesel up to B20
• 2 year warranty
• 2 in. threaded base for tank mounting
• Heavy duty cast iron construction
• Cast bronze rotor with bronze rotary vanes
• Built-in strainer
• 1 in. x 12 ft. hose with static wire
• 901 mechanical meter
• Manual nozzle
• Replaces FR4211D

Features

• Color coding avoids accidents
• Stainless steel flame arrester prevents flashback ignition
• Easy-to-use Safe-Squeeze® trigger for controlled pouring
• Two-openings; one for targeted pouring, one with ergonomically designed lift-lever for easy filling
• Approved by FM, UL/ULC, and TUV; also meets OSHA and NFPA requirements

Eagle 2.5 Gallon Type-II Safety Can (U226S) feature two openings, one with a pressure-relief spring closing lid for filling, one with an actuated pour valve with a flexible metal spout for safer controlled dispensing. The filler spout and flame arrestors in both openings are non-sparking brass designed for flashback protection. Can includes a 7/8” flexible metal spout and a red (for gasoline and other flammable liquids) powder coat finish with a trilingual label. FM, UL, and ULC Approved and meet OSHA and NFPA Code 30 requirements. Compliance: OSHA 29 CFR 1910.106, 1925.152 and NFPA Code 30.

Features

• 7/8” pouring hose
• 24-gauge hot dipped galvanized steel construction
• Spring closing lid for filling and a separate hose for accurate pouring
• Patented comfort grip
• Non-sparking flame arrester
• Baked on powder coat finish
• Double interlock, no-weld bottom seam
• Deep drawn construction means no top or side seams

• Fill-Rite Model FR1211H is a 12-Volt 15 GPM fuel transfer pump that comes with a 3/4 in. x 12 ft. discharge hose, 3/4 in. manual nozzle, 807C mechanical 3-digit fuel transfer meter (gallons), 1 in. x 34 in. telescoping steel suction pipe, 3/4 in. elbow, 5 ft. 12-Gauge ground wire, and a 18 ft. 12-Gauge 2-wire battery cable. It can be used to pump gasoline, diesel, kerosene, ethanol blends up to 15%, methanol blends up to 15%, and bio-diesel up to B20.
• It is important to note that the previous FR1211G model has been updated to the FR1211H model. With a removable junction box, the product is now easier to install. The performance specifications of the product did not change.

Features

• Flow Rate: 15 GPM
• Power Supply: 12V DC
• Fluids: Diesel & Gasoline
• Inlet: 1 Inch
• Outlet: 3/4 Inch
• Includes: 3/4” x 12’ Hose w/ Static Wire, 3/4” Manual Nozzle & 807C Mechanical Meter (Gallons)