Fuel

NO SPILL 1.25 GALLON GAS CAN

NO SPILL 2.5 GALLON GAS CAN

F1810HM0 18 GPM Fill-Rite™ Hydrosorb Spin-On Filter

Features

• Suited to handle contamination problems caused by dirt, silt and corrosion
• May be used with alcohol and alcohol fuel blends
• Pre-filtering keeps your fuel cleaner and helps your engines operate more efficiently

The Tuthill Fill-Rite N-Series nozzles are well suited for a broad range of high flow fueling applications from farm tractors and combines, heavy earth-moving equipment, fleet re-fueling, to above ground storage tanks and portable truck mounted fueling operations. This rugged series of automatic nozzles will provide years of service with minimal down time and quick fueling. 50 PSI working pressure. Red body cover to indicate gasoline compatibility. Large spout spring to hold nozzle in place.

Features

• Automatic nozzle with 3/4” NPT inlet
• 2 position hold open latch
• Compatible with un-leaded gasoline
• Optimal flow range: 5 to 12 GPM
• UL listed
• 3/4 in. aluminum nozzle
• 3/4 in. NPT-F outlet
• Automatic shut off
• 50 PSI working pressure
• Red body color to indicate gasoline compatibility
• Heavy duty hanging hook compatible with all Fill-Rite products
• Convenient one-finger hold-open clip to set flow rate
• Insulated hand grip to minimize hot and cold handling
• Large spout spring to hold nozzle in place
• Viton seals and o-rings for smooth valve operation
• Rated to -20°F operation
• Made in USA

MOTO4PLUS 1 GALLON NOT FOR USE IN PRODUCTS THAT REQUIRE FUEL-OIL MIXTURE!!!!

The Fill-Rite FRH07512 (3/4” x 12’, NPT) fuel transfer hose is constructed with an internal spring guard to resist kinking, stainless steel ground wire, fuel-resistant neoprene exterior, and nitrile interior. It is compatible with gasoline, diesel, biodiesel up to B20, ethanol up to E15, and kerosene. The FRH07512 hose is suitable for all electric fuel transfer pumps and has a 1-year warranty. Proudly made in the USA.

• Fill-Rite 1210KTF7019, Hydrosorb Filter Kit for 1210B Pump, 18 GPM, In-line
• 3/4 Hydrosorb filter kit includes filter, filter head and hardware

FILL-RITE® Transfer Pump, Portable, 10 gpm, 3/4 in NPT Inlet, 1 in FNPT Outlet, 1/5 hp, 12 VDC, 17 A, 3800 rpm Motor, Ball Bearing, Manual Nozzle, 3/4 in, 8 ft Hose Length, 6-1/2 ft Cord, Cast Iron Housing, Buna-N Seal, Cast Iron/Polypropylene, Mechanical Seal, 7-1/8 in L x 5-1/8 in W x 3-3/4 in H

Features

• This Fill-Rite® diesel fuel transfer pump delivers diesel fuel or antifreeze
• Diesel and anti-freeze
• 30 min duty cycle
• Bypass valve

12V DC, 20 GPM heavy duty, cast-iron, rotary vane fuel transfer pump. Designed for gasoline, diesel, biodiesel up to B20, E15, kerosene and mineral spirits. Includes pump, 1” ultra high flow automatic nozzle, 1” x 12” hose with static ground wire, 18’ battery cable with clamps, 20”-34” steel telescoping suction pipe, and 4-digit mechanical meter. UL/cUL, ATEX, CE motor. Two-year warranty. Made in USA.

Features

• 20 GPM (76 LPM)
• UL listed motor
• Heavy duty cast iron
• Diesel, Gasoline, Kerosene, E15, Biodiesel up to B20
• 2 year warranty
• 2 in. threaded base for tank mounting
• Heavy duty cast iron construction
• Cast bronze rotor with bronze rotary vanes
• Built-in strainer
• 1 in. x 12 ft. hose with static wire
• 901 mechanical meter
• Manual nozzle
• Replaces FR4211D

The Fill-Rite SD1202H model with NPT fittings is a 12V DC standard-duty, cast-iron, rotary vane fuel transfer pump that is capable of generating up to 13GPM. It is designed to handle flammable liquids such as gasoline, diesel, biodiesel blends up to B20, ethanol blends up to E15, kerosene, and mineral spirits. The pump motor utilizes a low amp draw and is thermally protected to prevent overheating. The SD1202H model is available with a 3/4” manual nozzle, 10’ fuel hose, 15” – 29” PVC suction pipe as well as other accessories. Made in the USA with a UL/cUL Listed Motor and one-year warranty, this product is ideal for agriculture, construction as well as any industry requiring mobile fuel transfer.