Search Results

IMPACT TORX BIT, T25 1” SHOCKWAVE

M18 Fuel 1/2” Hammer Drill One-Key Kit Disco, bare tool only 2806-20

SAWZALL BL 6T 9LG CLEAN WOOD 5PK

12IN CAX 1PK SAWZALL BLADE

SDS-PLUS CORE 8” ADAPTER 1”-1-1/2”

SDS-MAX 18” ADAPTER

Milwaukee’s core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in.. the inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) spline drive shank must be used to drive the core bit. Use 48-20-5199 center pin and 48-20-5173 guide plate for positioning and starting the hole. Thick wall core bits are available from 1 in. to 6 in. diameters. See thin wall core bits for less expensive drilling in new concrete and/or smaller hammers.

Features

• 3-1/2 in. diameter
• Usable cutting depth 4-3/8 in.
• Thick wall
• Use with thick wall core bit shank 48-03-3564 (12 in.) or 48-03-3565 (18 in.)

Milwaukee® M/2™ 2-cutter SDS-Plus rotary hammer drill bits are the most durable 2-cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. Additionally, M/2™ features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2™ 2-cutter drill bit line provides the ideal solution in general concrete for cordless and corded rotary hammer users.

Features

• Enhanced rebar guards provide increased durability
• Breaker points lead to faster drilling speeds
• Variable flute for up to 20% more holes per charge in cordless rotary hammers
• Centering tip for exact spot drilling
• Wear mark indicators to show end of life and when bit no longer meets the ANSI requirement
• Reinforced flutes for minimized vibration and maximum durability

16GA AG NAILER KIt Disco, bare tool replacement is 2841-20

BIT SELFEED 3-5/8”