Search Results

SHOCKWAVE™ BIT TIP HOLDER MAG 2.36” SHOCKWAVE™ BIT TIP HOLDER MAG 2.36”

M18 FUEL ANGLER FISH TAPE PULLER, TOOL Cartridge is item 48-44-5178

SAWZALL BL 9LG TUNGSTEN CBD GRIT 3PK

The Ax™ SAWZALL® blades have been engineered to deliver the fastest cuts, longest life, greatest tooth durability and quickest plunge cuts of any wood demolition blade on the market.

Features

• Nail Guard™
• Ordinary teeth deliver either speed or durability. Nail Guard™ solves this trade-off with an aggressive 5 TPI pattern for faster cuts and a unique design that protects against tooth fracture.
• Fang Tip™
• Ordinary tips bounce or skate on the work piece. Fang Tip™ bites into the wood on first contact.

Milwaukee® SDS-Max drill bits provide faster drilling speeds, increased life, and more cordless efficiency. Breaker point pulverize the material leading to up to 20% faster drilling speeds. Rebar guards protect the bit when hitting hard aggregate and rebar leading to longer life. Variable flutes remove the dust out of the hole more efficiently resulting in up to 15% more holes per battery charge. Wide flute entrances lead to faster drilling speeds, while reinforced flutes prevent bit breakage, rendering increased durability in tough concrete applications. The centering tip allows for exact spot drilling. All SDS-Max drill bits meet the ANSI specification for drilling holes for anchor applications and include wear mark indicator when signifying when the bit no longer meets the ANSI spec.

Features

• Breaker points for up to 20% faster drilling speeds
• Rebar guards for increased DuraGuard in hard aggregate and rebar
• Variable flutes for up to 15% more holes per battery charge
• Reinforced flutes to avoid bit breakage
• Wide flute entrance for increased faster dust removal
• Wear mark indicators to indicate end of life
• Centering tip of exact spot drilling
• ANSI specified to fit common anchors

Milwaukee’s core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) spline drive shank must be used to drive the core bit. Use 48-20-5199 center pin and 48-20-5174 guide plate for positioning and starting the hole. Thick wall core bits are available from 1 in. to 6 in. diameters. See thin wall core bits for less expensive drilling in new concrete and/or smaller hammers.

Features

• Thick wall design
• 4 in. diameter
• Usable cutting depth 4-1/16 in.
• Use with 12 in. or 18 in. spline adapter shanks (48-03-3564, 48-03-3565) and 12 in. or 18 in. SDS-Max adapter shanks (48-03-3572, 48-03-3573)
• Use with 7-1/2 in. extension 48-95-6085
• Use with guide plate 48-20-5176 and centering pin 48-20-5199
• Includes core body with guide plate & centering pin

2-7/8” HOLE DOZER HOLE SAW

The 2766 M18 FUEL™ high torque 1/2 in. impact wrench with pin pin detent provides a full corded replacement delivering 750ft-lbs of fastening torque and 1100ft-lbs of nut-busting torque. The industry’s most compact cordless high torque impact wrench at 8.1 in. in length, this tool allows for more access in tight spaces. 4-Mode DRIVE CONTROL™ with bolt removal mode gives users the most control over their fasteners. Bolt removal mode gives the user more control when removing fasteners by slowing to 750 RPM once the fastener has been busted loose. This tool includes a 1/2 in. pin pin detent anvil which provides superior socket retention. A premium rubber overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials.

Features

• POWERSTATE™ brushless motor delivers up to 750ft-lbs of fastening torque and 1100ft-lbs of nut-busting torque
• Most compact cordless high torque impact wrench in its class at 8.1 in. in length
• Industry leading 4-mode drive control with bolt removal mode, allowing for ultimate control. 0 to 950/1,500/1,800/1,800 to 750 RPM and 0 to 1,150/2,100/2,400/2,400 ipm
• Bolt removal mode provides maximum nut-busting torque to break fastener free, then slows to 750 RPM for more control when removing fasteners

M12 FUEL EXT REACH 3/8 RATCHET

3/8” DR 28PC SAE SET RATCHET & SOCKET SET