Filter Your Search
Category Group
Brand
Shop by Category
Loading...
Search Results
2.50 PWR 2X4-1/4 LEN - WELD 901-932-146-250
Item #:
WELD 901-932-146-250
Supplier Part #: 901-932-146-250
Brand:
Best Welds
2.50 PWR 2X4-1/4 LEN 2IN X 4-1/4IN PLASTIC
FLIP FRONT GOGGLE SHADE 5 - WELD 901-WG-2414SLF
Item #:
WELD 901-WG-2414SLF
Supplier Part #: 901-WG-2414SLF
Brand:
Best Welds
FLIP FRONT GOGGLE SHADE 5 SOFT SIDED
3/4DR 2-1/8 GRB RR RINGS - PROT JRR07534
Item #:
PROT JRR07534
Supplier Part #: JRR07534
Brand:
PROTO
Features
- Retaining rings are used to help secure sockets onto drive tools.
- They are not intended to bear any load.
- The rotational forces are between the drive tool and the socket.
- The resin crush gauge on the pin helps indicate when a socket is excessively worn and should be replaced.
- Drive tool and socket should line up when in use and should not pinch the crush gauge.
- Cracked sockets and or worn drive tools cause each other to turn excessively in relation to each other. This action pinches the small fin or the crush gauge on these retaining rings. If the crush gauge is pinched, it is an indication that the socket and or the drive tool need to be replaced.
- One-piece construction, no loose parts. Pin is made of resin which allows the material to compress without breaking.
- Part numbers are embossed on the rings near the point at which the pin and ring meet.
RETAIN RING F/IMPACT - PROT JRR15046
Item #:
PROT JRR15046
Supplier Part #: JRR15046
Brand:
PROTO
Features
- Large drive size crush gauge retaining ring.
- Part numbers are embossed on the rings near the point at which the pin and ring meet.
RETAINING RING - PROT JRR15054
Item #:
PROT JRR15054
Supplier Part #: JRR15054
Brand:
PROTO
Features
- Large drive size crush gauge retaining ring.
- Part numbers are embossed on the rings near the point at which the pin and ring meet.
1 PC SOCKET RETAINERS - PROT JRR15062
Item #:
PROT JRR15062
Supplier Part #: JRR15062
Brand:
PROTO
Features
- Large drive size crush gauge retaining ring.
- Part numbers are embossed on the rings near the point at which the pin and ring meet.
1 PC SOCKET RETAINERS - PROT JRR15070
Item #:
PROT JRR15070
Supplier Part #: JRR15070
Brand:
PROTO
Features
- Large drive size crush gauge retaining ring.
- Part numbers are embossed on the rings near the point at which the pin and ring meet.
1/2" DR RETAINING RING 800 GRV - PROT JRR50080
Item #:
PROT JRR50080
Supplier Part #: JRR50080
Brand:
PROTO
1/2” DR RETAINING RING 800 GRV 1/2” DR RETAINING RING 800 GRV
