Filter Your Search
Category Group
Brand
Shop by Category
Search Results
SAWZALL BL 6T 9LG CLEAN WOOD 5PK - MIL 48-00-5016
SAWZALL BL 6T 9LG CLEAN WOOD 5PK
M12™ FORCE LOGIC™ PRESS TOOL 1/2" - 1" K - MIL 2473-22
M12™ FORCE LOGIC™ PRESS TOOL 1/2” – 1” K M12™ FORCE LOGIC™ PRESS TOOL 1/2” – 1” KIT
M12 Fuel 1/2" Rt Angle Impact w/Detent - MIL 2565P-20
M12 Fuel 1/2” Rt Angle Impact w/Detent Bare Tool
SDS-MAX Drill Bit, 1-3/4In x 18In x 23In
Milwaukee®’s SDS-Max 4-cutter rotary hammer drill bits feature a 4-cutter 4 × 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.
Features
- 1-3/4 in. diameter, 4-cutter head
- SDS-Max shank
- Drilling depth 18 in.
- Overall length 23 in.
SDS-MAX/Spline Core Bit, 4In x 4-1/16In
Milwaukee’s core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) spline drive shank must be used to drive the core bit. Use 48-20-5199 center pin and 48-20-5174 guide plate for positioning and starting the hole. Thick wall core bits are available from 1 in. to 6 in. diameters. See thin wall core bits for less expensive drilling in new concrete and/or smaller hammers.
Features
- Thick wall design
- 4 in. diameter
- Usable cutting depth 4-1/16 in.
- Use with 12 in. or 18 in. spline adapter shanks (48-03-3564, 48-03-3565) and 12 in. or 18 in. SDS-Max adapter shanks (48-03-3572, 48-03-3573)
- Use with 7-1/2 in. extension 48-95-6085
- Use with guide plate 48-20-5176 and centering pin 48-20-5199
- Includes core body with guide plate & centering pin
RAT BOX WRENCH 3/8X7/16 12 - PROT J1182T
RAT BOX WRENCH 3/8X7/16 12 PT POLISHED OFFSET
