Search Results

RIDGID® Pipe Vises use a chain or yoke vise to hold and work pipe. The bench vises are mounted to a bench or other stable horizontal platform. For lighter duty applications, portable vises are equipped with a clamp or chain for temporary mounting.

ErrNA

4-1/2 40 A/O BIG CAT FLAP D (10/bx)

4-1/2 X 7/8 40 Ce-Z TIGER-X “TYPE 29, PHENOLIC (10/bx)”

CUTTING TIP (ANCHOR) ANCHOR 2-1-101

Model JC10PLUS – a super-quiet oilless air compressor – is the follow-up to our wildly popular JC10. The JC10PLUS features a host of improved features including a larger tank, sturdier roll-cage, integrated cord wrap and upward-facing gauges. The two-cylinder pump is powered by a 1700 RPM low-amp draw motor for maximum efficiency.

Notes

ABOUT THE PUMP
Super Quiet, ROLAIR Quality, Single Stage, Oil-Less, Two Cylinder, Ball Bearings, Cast-Aluminum Cylinder, Stainless-Steel Reed Valves, Low RPM for Quiet Operation – ONLY 60 dB!!
ABOUT THE MOTOR
1 HP, 1725 RPM, Low Amp Draw, Automatic Overload Protection, 115 Volt – 60 Hz, Heavy-Duty/Industrial-Grade with Ball Bearings for Greater Durability.
STANDARD EQUIPMENT
Start/Stop Pressure Switch
Roll-Cage Design to Protect Pump/Motor
Safety Relief Valve
Intake Filter/Silencer
7.5 Amp Motor
Quiet – ONLY 60 decibels!!
Air Line Regulator and Pressure Gauge
Cord Wrap

5 HP single and two-stage light industrial stationary electric air compressors. Model V5160PT03X shown. Click to view all models in this category.
Optional Equipment: (No optional equipment available for V5160PT03X) Automatic Tank Drain, Low Oil Shut Down, Vibration Pads, Dual Controls, Head Unloader, Refrigerant Air Dryer.

Notes

ABOUT THE PUMP
Single or Two Stage, Cast-Iron Cylinders, Aluminum Head and Crankcase for Faster Heat Dissipation, Ball Bearings, Splash Lubricated, Bearing Inserts on Connecting Rods, Swedish Lamellar Reed Valves, Oil Sight Gauge, Low RPMs to Ensure Long Life and Trouble-Free Performance.
ABOUT THE MOTOR
3450 RPM, 60 Hz, Single Phase 230 Volt, Open Drip-Proof Motor.
STANDARD EQUIPMENT
Pressure Switch – Start/Stop Operation,145-175 PSI Settings, On/Off Switch
Automatic Unloading Device for Loadless Starts
Heavy-Duty Brass Shut-Off Valve
Pressure Gauge, 0-300 PSI in 5 lb. Graduations
Safety Relief Valve – ASME Approved
Multiple V-Belt Drive
Intake Filter/Silencer with Replaceable Element
Totally Enclosed Steel Belt Guard

BLUE UTILITY TARP, 12X20 (070629) 6/BX

Stainless Steel Rope Grab, 5/8”

Features

• Stainless Steel Quick Disconnect Non-Powered Base.
• Our Quick Disconnect mounts are an extreme benefit for a super-fast install and removal of the whip for end users; whips can even be disconnected one handed which is extremely beneficial. Our Quick Disconnect adaptors are great for clients but most importantly our stocking distributors; as that enables any whip to be a Quick Disconnect Whip easily. We offer Quick Disconnect adaptors without the receiving base and Quick Disconnect Adaptor Kits with the adaptor and receiving base mount for use in converting any powered or non-powered ½? 20 thread whip connection to a Quick Disconnect Whip. Our Quick Disconnect mounts and accessories are so simple to operate as they utilize Snap type (ball latching) quick disconnects which are manufactured with a spring loaded ball latching mechanism which automatically locks the two halves of the fitting together when they are pushed together. When the releasing sleeve is pulled back, the interior end and exterior ends quickly unlock from each other. Since many whip users remove their whip several times a day to get on or off highway; this quick release component is beneficial for whip users who require frequent install and removal of the whip throughout the life cycle of the whip. These QDCs can handle pressure, jolts and jarring on a consistent basis as evidenced by the mining industry we started using SafetyWhips® in so many years ago.