Search Results

• Anchorage: The anchorage to which this product is attached must be capable of sustaining a static load in the direction applied by the personal fall arrest system of at least 3600 lbs. with certification of a qualified person or 5000 lbs. without certification. When more than one personal fall arrest system is attached to the same structure, the strength requirements stated above must be multiplied by the number of personal arrest systems attached to the structure.
• Plan your personal fall protection system. Before installing and using this equipment, consider all factors affecting your safety during use of this equipment.
• Warnings and instructions must be read and understood before using equipment.
• Equipment must be used by trained personnel only.
• Users must understand all OSHA regulations, ANSI standards, and other relevant regulations and standards pertaining to fall protection equipment.

XL IRON WORKERS TYPE HARNESS 3 D-RING W/ D-RINGS ON BACK & HIPS; BACK PAD & TOOL BELT; TONGUE-BUCKLE CONNECTIONS; QUICK RELEASE CHEST W/ MINI-X – Hardrock Logo

7/16 X 2 COBALT CUTTER

• The exclusive smooth crown design contains a technically advanced suspension with eight load bearing points to stabilize and balance the hard hat during everyday wear.
• On impact, the SuperEight® impact energy control system dissipates force by reducing it to smaller increments and spreading it over a greater area.
• Fibre-Metal® by Honeywell Hard Hat, Cap Style, Series: E2, Unisex Size, Blue, Thermoplastic, 8-Point SwingStrap™ Suspension, ANSI Electrical Class Rating: Class C, E and G, ANSI Impact Rating: Type I, Slotted: No, Ratchet Adjustment

BONDO HARDNER TUBE

COVER PLATE, CR-39, 4X5“Fibre-Metal provides a full selection of welding filters: safety and cover plates and lenses for our welding helmetsand goggles. Our HIGH PERFORMANCE line includes a topquality plate or lens for virtually every metal fabricating application.All products are produced to the highest standards with rigid qualitycontrol to enhance a fabricators view of the job for maximumproductivity while providing protection in accordance with ANSIZ87.1 requirements. To get the most from a Fibre-Metal weldinghelmet or goggle: equip it with HIGH PERFORMANCE filter:safety and cover plates or lenses.

Features

GLASS FILTERS

• Precision cut to true size for a better fit.
• Optically correct with consistent shading throughout the plate or lens for welder protection and comfort.

POLYCARBONATE FILTERS

• About 1/3 the weight of a comparable glass filter: and many times more impact resistant: polycarbonate filters are the choice of high production welders.

GOLD PLATED FILTERS

• All the advantages of a polycarbonate filter: with the benefit of a gold coating which reflects up to 99% of infrared light: reducing the temperature inside the helmet.
• A cooler: more comfortable welder will stay on the job longer and produce more.

POLYCARBONATE SAFETY PLATE

• Injection molded: optically correct: lightweight: impact resistant polycarbonate plate provides an extra margin of protection.

CR39 COVERS

• Top quality cover plates contain a higher percentage of CR39 material than any other brand including those that claim to be “100% CR39?.
• Higher quality provides better protection and a longer service life for expensive filter plates.

POLYCARBONATE WELDING MAGNIFIERS (CHEATERS)

• Injection-molded in one piece from a special optical grade polycarbonate: reduces eye fatigue and irritation because it is optically correct.
• It is the only magnifier on the market designed for an optimum 12? working distance from the weld instead of the usual 6? distance.
• Silicone hardcoating protects the surface from scratches and scuffs.

Product overview: Fluke 116/323 HVAC Combo Kit – Includes Multimeter and Clamp Meter
Having the right tool for the job is essential. Having all the right tools when you need them is even better. The Fluke 116/323 HVAC Combo Kit gives you the best in a versatile, rugged multimeter and a fast-acting, general purpose clamp meter.
The Fluke 116 comes with the Fluke 80BK-A integrated DMM temperature probe; no need to carry a separate thermometer. The microamp function allows flame sensor measurement down to 0.1 microamps. The AutoV/LoZ function prevents false readings caused by ghost voltage. The Fluke 116 also has a large white LED backlight for work in poorly lit areas. It measures resistance, continuity, frequency, and capacitance and provides Min/Max/Average readings with elapsed time to record signal fluctuations.
Fluke 116 multimeters are independently tested for safe use in CAT III 600 V environments.
True RMS measurements and optimized ergonomics make the Fluke 323 True RMS Clamp Meter the best general purpose clamp meter for commercial and residential electricians. The Fluke 323 model is ideally suited for current measurements up to 400 A in tight cable compartments.
Together, the Fluke 116 HVAC Multimeter and 323 True RMS Clamp Meter give electricians the right tools for the job.

Features

• Fluke 116 Digital Multimeter. Designed by Electricians. Engineered by Fluke.
• Built-in thermometer for HVAC applications
• Microamps to test flame sensors
• Low input impedance: helps prevent false readings due to ghost voltage
• Large white LED backlight to work in poorly lit areas
• Resistance, continuity, frequency and capacitance
• Min/Max/Average with elapsed time to record signal fluctuations
• Compact ergonomic design for one-handed operation
• Compatible with optional magnetic hanger (ToolPak™)
• CAT III 600 V safety rated
• Fluke 323 True-rms Clamp Meter. Rugged. Reliable. Precise.
• 400 A AC current measurement
• 600 VAC and DC voltage measurement
• True RMS AC voltage and current for accurate measurements on non-linear signals
• Resistance measurement up to 40 kO with continuity detection
• Slim, ergonomic design
• CAT IV 300 V/CAT III 600 V safety rating

Product overview: Fluke 1AC II Non-Contact Voltage Tester
The pocket-sized voltage detector
The portable 1AC II non-contact voltage tester from Fluke are easy to use – just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there’s voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home and even detect miswires of an electrical outlet.
The tip glows red and a beeper sounds when voltage is detected
A loud, easy to hear beeper will sound and the tip will glow red when voltage is detected
Optionally, the beeper can be disabled for use in quiet environments
Continuous self-test so you always know it’s working
When the tip blinks red you know it’s working properly
Provides a continual visual indication that the 1AC II is on
90 V to 1000 V AC or 200 V to 1000 V AC voltage detection range for wide application use
Wide voltage detection range allows for use in a broad range of applications
Also available in a low voltage model from 20 V to 90 V AC for controls circuits
Safety features
Rated to CAT IV 1000 V for added protection
CE and CSA approved
Additional tool features
Audible/Silent mode for added convenience in quiet environments
On/Off button
Batteries included
2 year warranty

Features

• Be aware of voltage easily – the tip glows red and a beeper sounds when voltage is detected
• Continuous self-test so you always know it’s working
• Voltage detection range for wide application use – 90 V to 1000 V AC or 200 V to 1000 V AC
• Audible/Silent mode for added convenience

Product overview: Fluke TL75 Hard Point™ Test Lead Set
Product overview: Fluke TL75 Hard Point™ Test Lead Set
The Fluke TL75 Hard Point™ Test Leads are a set of comfort grip, PVC-insulated probes. TL75s offer the convenience of a test lead and probe together in one unit with a variety of connections. This set of test leads are recommended for all general-purpose measurements and are compatible with a wide range of Fluke meters and tools.
Designed for safety
The Fluke TL75 Hard Point™ Test Lead Set is CAT II 1000 V, 10 A rated. When the protective caps are placed on the leads, the ratings jump up to CAT IV 600 V, CAT III 1000 V.
Compatible with Fluke alligator clips
Expand your measurement capabilities with special adapters to your TL75 set. Add alligator clips or adapters to accomplish even more:
Fluke AC175 Alligator Clip Set
TP920 Test Probe Adapter Set

Features

• Test lead and probe in one unit
• 48 inches (1.22 meter) long
• CAT II 1000 V, 10 A rated
• CAT IV 600 V, CAT III 1000 V rated with protective cap
• CSA Listed

Set contains 6 Point sizes 10mm to 36mm; Set Contains 26 Pieces; 1/2” Drive 26 Pc. Standard Length Metric Master Set; Molded Storage Case; Lifetime Warranty (Individual Parts Only).