Search Results

3/4-16 MAINT TAP,PLUG,4FL OLD # U/B 81-10047 (1/pk)

6-32 MAINT TAP,PLUG,3FL OLD # U/B 81-10238 (12/pk)

1/4-28 MAINT TAP,BOTTOM,4FL OLD # U/B 81-10006 (6/pk)

T9 49/64IN S&D 1/2IN SHANK HSS BLACK OXIDE (1/pk)

TurboTorch AH-12 Acetylene Torch Hose (0386-1090)
Swirl Air Acetylene Component 12’ Acetylene Hose.
3/16” I.D. with 3/8” 24-thread LH nuts. Fits G4 and PLF-A Handle, AR-B (CGA-520) & AR-MC (CGA-200) regulators. AH-12, 12 ft. (3.6M) hose.

#2025 1-1/2IN-6 DIE NUT (1/pk)

• Anchorage: The anchorage to which this product is attached must be capable of sustaining a static load in the direction applied by the personal fall arrest system of at least 3600 lbs. with certification of a qualified person or 5000 lbs. without certification. When more than one personal fall arrest system is attached to the same structure, the strength requirements stated above must be multiplied by the number of personal arrest systems attached to the structure.
• Plan your personal fall protection system. Before installing and using this equipment, consider all factors affecting your safety during use of this equipment.
• FREE FALL: Ensure adequate clearance exist in your fall path to prevent striking an object. When the safety retractable is anchored above, a minimum of 6 ft. from the working level to the lower level or nearest obstruction is recommended, if anchored at feet level an additional 4 ft. Clearance is needed. Avoid working where your lifeline may cross or tangle with that of another worker. Do not allow the lifeline to pass under your arms or between your feet, never clip, knot, or otherwise prevent the lifeline from retracting.

• Anchorage: The anchorage to which this product is attached must be capable of sustaining a static load in the direction applied by the personal fall arrest system of at least 3600 lbs. with certification of a qualified person or 5000 lbs. without certification. When more than one personal fall arrest system is attached to the same structure, the strength requirements stated above must be multiplied by the number of personal arrest systems attached to the structure.
• Plan your personal fall protection system. Before installing and using this equipment, consider all factors affecting your safety during use of this equipment.
• Warnings and instructions must be read and understood before using equipment.
• Equipment must be used by trained personnel only.
• Users must understand all OSHA regulations, ANSI standards, and other relevant regulations and standards pertaining to fall protection equipment.

XL IRON WORKERS TYPE HARNESS 3 D-RING W/ D-RINGS ON BACK & HIPS; BACK PAD & TOOL BELT; TONGUE-BUCKLE CONNECTIONS; QUICK RELEASE CHEST W/ MINI-X – Hardrock Logo

7/16 X 2 COBALT CUTTER