Search Results

KEYED ALIKE LOCK

Features

• Aluminum oxide general purpose wheel for heavier working conditions for steel and other ferrous metals.
• Very fast rate of cut.
• Good wheel life.

Features

• For extraction from the power tool in continuous mode, both on construction sites and in the workshop
• Especially suited for extracting concrete and rock dust
• Compact vacuum cleaner for liquids and dry solids with commercial registration
• Power socket for a power tool for using the automaticalstart-up/shut-down of the vacuum cleaner
• AutoCleanPlus: saves both costs and time thanks to automatic MPulse filter cleaning during continuous use
• If the optimum suction performance falls below a certain level, the filters are vibrated immediately
• Equipped with HEPA filter, keeps back 99.995% of fine dusts over 0.3 µ
• Automatic shut-down when vacuuming liquids once the maximum fill level is reached
• Suction power control for adapted suction performance
• Automatic trailing mechanism for emptying the suction hose completely
• Antistatic basic equipment prevents static charge when using appropriate accessories
• Sturdy thanks to especially large wheels and castors with wheel stop
• Cable winding mechanism
• Practical accessory case and storage area
• Current Control: maximises the suction power while the machine is connected so that the main fuse is not triggered

Features

• Robust motor
• Side handle can be mounted in three positions
• Metabo safety switch prevents unintentional start

DRILL HOLE HAWG

M12 FUEL 1/4” STRAIGHT DIE GRINDER

Features

• Retaining rings are used to help secure sockets onto drive tools.
• They are not intended to bear any load.
• The rotational forces are between the drive tool and the socket.
• The resin crush gauge on the pin helps indicate when a socket is excessively worn and should be replaced.
• Drive tool and socket should line up when in use and should not pinch the crush gauge.
• Cracked sockets and or worn drive tools cause each other to turn excessively in relation to each other. This action pinches the small fin or the crush gauge on these retaining rings. If the crush gauge is pinched, it is an indication that the socket and or the drive tool need to be replaced.
• One-piece construction, no loose parts. Pin is made of resin which allows the material to compress without breaking.
• Part numbers are embossed on the rings near the point at which the pin and ring meet.

20IN CHAIN 3/8-.050 3624-005-0072

HEADGEAR ASSY-7INCRN W/RTCHT

Features

• 4-Bar compound linkage, cuts 1 1/2” diameter
• Resharpenable, PTFE non-stick coated, high-carbon steel bypass blade
• Slant-ground hook with sap groove
• 24” Fiberglass handles
• Extra-long 8” non-slip foam grips