Search Results

OXYGEN RH B TO B COUPLER

8 LB HEAD, 30” B.A.S.H® SLEDGE HAMMER

JHJ-22-1/2, 22-1/2 TON

HEAVY DUTY F-CLAMPS 24” 24” OPENING 4-3/4” THROAT 2600LB CLAMPING FORCE

Features

• Retaining rings are used to help secure sockets onto drive tools.
• They are not intended to bear any load.
• The rotational forces are between the drive tool and the socket.
• The resin crush gauge on the pin helps indicate when a socket is excessively worn and should be replaced.
• Drive tool and socket should line up when in use and should not pinch the crush gauge.
• Cracked sockets and/or worn drive tools cause each other to turn excessively in relation to each other. This action pinches the small fin or the crush gauge on these retaining rings. If the crush gauge is pinched, it is an indication that the socket and or the drive tool need to be replaced.
• One-piece construction, no loose parts. Pin is made of resin which allows the material to compress without breaking.
• Part numbers are embossed on the rings near the point at which the pin and ring meet.

WARNING: This product is part of a personal fall arrest system. The user must read and follow the manufacturers instructions for each component of the system.These instructions must be provided to the user of this product. The user must read and understand these instructions before using this product. Manufacturers instructions must be followed for proper use and maintenance of this product. Alteration or misuse of this product, or failure to follow instructions may result in serious injury or death.

ANCHORAGE: The anchorage to which this product is attached must be capable of sustaining a static load in the direction applied by the personal fall arrest system of at least 3600 Ibs. With certification of a qualified person, or 5000 Ibs. without certification. When more than one personal fall arrest system is attached to the same structure, the strength requirements stated above must be multiplied by the number of personal arrest systems attached to the structure. PLAN your personal fall protection system before installing and using this equipment. Consider all factors affecting your safety during use of this equipment.

CAUTION: BEWARE OF PENDULUM SWINGS TO AVOID STRIKING AN OBJECT OR CONTACT WITH A LOWER LEVEL, FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT IN SERIOUS INJURY.

Eagle Type 1 Safety Cans are constructed of 24-gauge hot dipped galvanized steel. Eagle safety cans are accepted under CARB, meet OSHA and NFPA Code 30 requirements, and are UL, ULC and FM Approved for safe handling and storage of gasoline and other flammable liquids. Available in a variety of colors for the safe handling and storage of flammables (red), kerosene (blue), diesel (yellow) and combustible liquids such as oils (green). Available with or without a funnel.

16 lb Sledge Hammer with 36” Hickory Handle. Used to Strike Stone, Concrete, Metal, and Wood. Often Used to Drive Stakes and Posts, Move Timbers, and Break Concrete.

Features

• Tough non-woven disc aggressively deburrs and finishes
• Conformable, non-woven disc combined with Roloc backing allows for aggressive cutting
• Open-web construction resists loading and runs cool, allowing for consistent finishes
• Convenient 3M™ Roloc™ attachment system offers quick and easy disc change-out for multi-step finishing processes

• Ajax Rivet / Zip Gun Chisels are manufactured from high grade alloy steel.
• These chisels are offered in various shank and point styles, and receive varying degrees of hardness to fit the specific application that is required.
• This class of chisels is used for metal cutting, scraping, splitting, and driving applications.
• 18 in (457.2 mm); 3/4 in (19.1 mm) Blade Width; .401 Turn Type Shank; Flat Chisel