Search Results

ANGLE DIE GRINDER

1/2” VSR 550 RPM/REV SPADE HANDLE DRILL 1/2” VSR 550 RPM/REV SPADE HANDLE DRILL 9.0 AMP

1/2” 0-850 RPM VSR DRILL 3 WIRE PLUG 7.8 1/2” 0-850 RPM VSR DRILL 3 WIRE PLUG 7.8 AMP

TAP 3/4”-14NPT PIPE” TAP 3/4”-14NPT PIPE”

Features

• Keep workers safe from accidental slips indoors and avoid costly hazmat cleanup costs
• EcoPolyBlend™ black is 100% recycled
• Compliance with NFPA 30, OSHA, EPA, SPCC, and fire codes
• 2 drum, in-line configuration protects against groundwater contamination from leakage and spills
• Sump capacity of 66 gal (250 L)
• Recycled content saves on oil, electricity, and landfill space

2-Way Radio, 64 Channel

ERECTION WRENCH 7/8” BOLT FOR HEAVY NUT ERECTION WRENCH 7/8” BOLT FOR HEAVY NUT

12 in. Fleam Ground Recip Blade for Prun 12 in. Fleam Ground Recip Blade for Pruning (5-Pack)

12 in. Demo Demon Carbide General Purpos 12 in. Demo Demon Carbide General Purpose Recip

Quik-Mark™ Water-Based Inverted Marking. Paint offers an advanced UV resistant formula. Our formula allows you to mark your lines during harsh or adverse conditions, even in extreme sun, Quik-Mark™ advanced UV resistant formulas will not fade to a different color! Accuracy, speed and ease of marking. will keep your locators efficient and productive while lowering the overall costs of a ticket.. Total marking paint performance eliminates costly remarking, clogged and wasted cans, and allows marking with confidence in any weather conditions.. Both APWA and Fluorescent colors are available in water-based and solvent-based formulations, in 16-oz., 20-oz. and our 25-oz. size cans. One-coat coverage and our Spray-Thru™ cap allow for inverted painting ease. Use on concrete, pavement, gravel, grass, brick, asphalt, athletic fields, utility, excavation, ground surveying and construction marking.

Features

• One pass valve for bold, bright, visible markings
• Glove Grip™ cap has a 50% wider opening to easily accommodate work gloves
• Spray-Thru™ cap – non-clogging spray tip
• Locking tip won’t fall off with extended use
• Fast drying formula penetrates and adheres to hot, cold or wet surfaces
• VOC/MIR compliant

APPLICATION CONDITIONS

• For best results use when can is between 70-80°F.
• Shake can well until mixing ball breaks loose.
• Hold can at top and swing bottom of can in a circle until ball travels freely (repeat during extended use).
• To spray, invert can and point spray button 4-6 inches above surface.
• Press button to the side to actuate.
• Use with Krylon Marking Wands (K07095 and K07096) to reduce back strain and obtain consistent writing, stenciling and marking.
• When using marking wands, follow shaking instructions, then insert can and pull trigger to spray.

Performance

• High-solids formulation for bold, bright, visible markings
• Fast-drying formula penetrates and adheres to hot and cold surfaces
• Convenient Spray-Thru™ cap
• Non-clogging Spray tip