Search Results

The Milwaukee® 10 in. saw chain is to be used with the M18™ FUEL™ 10 in. pole saw with QUIK-LOK™ (2825-21PS) and M18™ FUEL™ QUIK-LOK™ 10 in. pole saw attachment (49-16-2720). The replacement saw chain design provides fast cuts with low vibration and minimum kickback. The chain features a durable design and is weather resistant for increased life.

Features

• For use with the Milwaukee® M18 FUEL™ QUIK-LOK™ 10 in. pole saw (49-16-2720)
• Bar length: 10 in.
• Gauge: 0.043 in.
• Pitch: 3/8 in. low profile
• Drive lengths: 40
• To be used with narrow Kerf bars

Features

• For extraction from the power tool in continuous mode, both on construction sites and in the workshop
• Especially suited for extracting concrete and rock dust
• Compact vacuum cleaner for liquids and dry solids with commercial registration
• Power socket for a power tool for using the automaticalstart-up/shut-down of the vacuum cleaner
• AutoCleanPlus: saves both costs and time thanks to automatic MPulse filter cleaning during continuous use
• If the optimum suction performance falls below a certain level, the filters are vibrated immediately
• Equipped with HEPA filter, keeps back 99.995% of fine dusts over 0.3 µ
• Automatic shut-down when vacuuming liquids once the maximum fill level is reached
• Suction power control for adapted suction performance
• Automatic trailing mechanism for emptying the suction hose completely
• Antistatic basic equipment prevents static charge when using appropriate accessories
• Sturdy thanks to especially large wheels and castors with wheel stop
• Cable winding mechanism
• Practical accessory case and storage area
• Current Control: maximises the suction power while the machine is connected so that the main fuse is not triggered

The RIDGID® 300 and 400 Series Lever Benders are designed to
easily bend metal tubes to a maximum of 180°. The 400 Series Instrument benders can be used to bend copper, steel and stainless steel tubes with a wall thickness up to 0.06”
(1,5 mm)

5 HP single and two-stage light industrial stationary electric air compressors. Model V5160PT03X shown. Click to view all models in this category.
Optional Equipment: (No optional equipment available for V5160PT03X) Automatic Tank Drain, Low Oil Shut Down, Vibration Pads, Dual Controls, Head Unloader, Refrigerant Air Dryer.

Notes

ABOUT THE PUMP
Single or Two Stage, Cast-Iron Cylinders, Aluminum Head and Crankcase for Faster Heat Dissipation, Ball Bearings, Splash Lubricated, Bearing Inserts on Connecting Rods, Swedish Lamellar Reed Valves, Oil Sight Gauge, Low RPMs to Ensure Long Life and Trouble-Free Performance.
ABOUT THE MOTOR
3450 RPM, 60 Hz, Single Phase 230 Volt, Open Drip-Proof Motor.
STANDARD EQUIPMENT
Pressure Switch – Start/Stop Operation,145-175 PSI Settings, On/Off Switch
Automatic Unloading Device for Loadless Starts
Heavy-Duty Brass Shut-Off Valve
Pressure Gauge, 0-300 PSI in 5 lb. Graduations
Safety Relief Valve – ASME Approved
Multiple V-Belt Drive
Intake Filter/Silencer with Replaceable Element
Totally Enclosed Steel Belt Guard

1/2” 0-850 RPM VSR DRILL 3 WIRE PLUG 7.8 1/2” 0-850 RPM VSR DRILL 3 WIRE PLUG 7.8 AMP

M12™ REDLITHIUM 2.0AH CP BAT

Onguard Sitex 2X Yellow 3 Piece Rain Suit features 0.35 mm high density PVC on polyester heavy-duty construction to render high abrasion resistance. Suit with storm flap front features adjustable waist snaps for comfortable fit and has heavy-duty adjustable suspender. Suit having two front snap pockets consists of cape back jacket with vents and incorporates underarm vents that give cool effect to user. It features ankle and cuff take-up snaps for convenient as well as tapered fit while offers versatile industrial grade conservation for all-purpose use.

Features

• High quality PVC on polyester
• Heavy duty adjustable suspender
• Adjustable waist snaps for the perfect fit
• Ankle and cuff take-up snaps for a snug/tapered fit
• Two front snap pockets on jackets
• Cape back jacket with vents
• Underarm vents to keep you cool

Gardner Bender cable ties are designed for strength, durability and reliability. Ideal for all bundling and organizing tasks from the workshop to the office and from the laundry room to the kitchen; you name it, and these ties will bundle it. Designed with simple enhancements that make them easy to use including a slightly bent tip to ensure easy insertion into the tie head and close serrations along it’s length to promote precise adjustment when tightening. Gentle on the hands with smooth radiused edges that ensure “slip” through the head and finger grips on the end to provide a secure and comfortable grip when tightening. Made from durable 100 percent nylon 6/6 material these ties are UL recognized with a serviceable temperature range from 0 deg C to 85 deg C (32 deg F to 185 deg F). If you want a high quality product that will fulfill all your application needs, then choose Gardner Bender cable ties.

Features

• Bent tip ensures easy insertion into the tie head
• Easy “slip” during pull-thru due to smooth radiused edges
• Finger grips on end provides secure grip to tighten
• Made from durable 100% nylon 6/6 material
• 13/16” Maximum bundle diameter
• 4” Long X 0.095” Wide X .035” Thick with 18lb Tensile Strength
• Natural in color
• 100/Bag

Features

• Will not harden, separate, or evaporate
• Does not contain clay or soap base thickeners
• Cannot be burned off and will not melt or run out after application
• Protects parts under extreme heat, cold, pressure, steam, and salt water exposure
• Protects against corrosion, seizing, rust, galling, galvanic pitting, and carbon fusing
• Capacity Wt.: 1 lb
• Packing Type: Brush Top Bottle
• Temp. Range: -40.0 °F [Min], 2000.0 °F [Max]
• Applications: Bushings, Flanges, Machinery, Manifolds, Pumps, Sleeves, Threaded Connections, Valves
• Type: Cooper
• Quantity: 12 per case
• Wt.: 0.83 lb
• Order UOM: CN

Product overview: Fluke 116/323 HVAC Combo Kit – Includes Multimeter and Clamp Meter
Having the right tool for the job is essential. Having all the right tools when you need them is even better. The Fluke 116/323 HVAC Combo Kit gives you the best in a versatile, rugged multimeter and a fast-acting, general purpose clamp meter.
The Fluke 116 comes with the Fluke 80BK-A integrated DMM temperature probe; no need to carry a separate thermometer. The microamp function allows flame sensor measurement down to 0.1 microamps. The AutoV/LoZ function prevents false readings caused by ghost voltage. The Fluke 116 also has a large white LED backlight for work in poorly lit areas. It measures resistance, continuity, frequency, and capacitance and provides Min/Max/Average readings with elapsed time to record signal fluctuations.
Fluke 116 multimeters are independently tested for safe use in CAT III 600 V environments.
True RMS measurements and optimized ergonomics make the Fluke 323 True RMS Clamp Meter the best general purpose clamp meter for commercial and residential electricians. The Fluke 323 model is ideally suited for current measurements up to 400 A in tight cable compartments.
Together, the Fluke 116 HVAC Multimeter and 323 True RMS Clamp Meter give electricians the right tools for the job.

Features

• Fluke 116 Digital Multimeter. Designed by Electricians. Engineered by Fluke.
• Built-in thermometer for HVAC applications
• Microamps to test flame sensors
• Low input impedance: helps prevent false readings due to ghost voltage
• Large white LED backlight to work in poorly lit areas
• Resistance, continuity, frequency and capacitance
• Min/Max/Average with elapsed time to record signal fluctuations
• Compact ergonomic design for one-handed operation
• Compatible with optional magnetic hanger (ToolPak™)
• CAT III 600 V safety rated
• Fluke 323 True-rms Clamp Meter. Rugged. Reliable. Precise.
• 400 A AC current measurement
• 600 VAC and DC voltage measurement
• True RMS AC voltage and current for accurate measurements on non-linear signals
• Resistance measurement up to 40 kO with continuity detection
• Slim, ergonomic design
• CAT IV 300 V/CAT III 600 V safety rating