Concrete

9cf CONCRETE MIXER W/ HONDA GX160 ENGINE

• Weka DK12 Hand Held Drill Motor
• Can be used on the M-3 and M-4 core rigs.

Features

• This hand held drill motor allows you to drill up to 3 In. hand held and up to 6 In. when mounted on the core rig
• Thermal overload protection switch with side handle for stability and water connection for wet coring only
• 14 Amp 110 V 580/1400/ 2900 RPM 3-speed (Slip clutch) hand held drill motor with thermal overload protective switch.
• Includes carrying case and wrench two leveling bubbles for accurate coring

Features

• 2-1/2” square column (mast) with black oxidized finish
• 6” wheels for easy mobility
• Dual switch/outlet control panel with amp meter (except for CB700 models with LED amp meter)
• Vacuum pump for quick mounting to flat surface without drilling an anchor hole (included with combination rig)
• 4 leveling screws on the base
• Up to 14” bit capacity with one spacer block
• Slide handle allows for drilling in tight areas
• Combination base is a quick change over from vacuum to anchor base
• Ceiling jack helps keep the rig in place as a backup for anchoring or vacuuming the base down (used with a brace piece-2 × 4 or other material)

HEAD ASSY 2-1/4IN W878-568

The W988-910 Wyco CK-8910 10ft Flexible Shaft ships factory direct to your door.

HYD. VIBRATOR 2-1/4” HEAD 45DEG.

You mend, repair, and create so that our environment remains worth living in. To make this work easier for you we built the best machines – from tampers and vibratory plates to hand-guided vibratory rollers and multi-purpose compactors. For over 60 years, the history of our company has synonymous with the history of compaction.

Features

• Vibration insulated steering bow
• Detachable steering handle
• Highly wear resistant base plate
• Automatic shutdown at low oil level
• Recoil starter
• Single point lifting device
• Fully protected V-belt
• Carrying handles
• Bolt on exciter housing
• Centrifugal clutch
• Fully enclosed V-belt

The Bosch DH1020VC SDS-max® demolition hammer features an in-line design, for excellent weight distribution while chiseling concrete in downward or horizontal applications. It is a 15.0 Amp tool that gets the job done, delivering a best-in-class 17.0 Ft.-Lbs. of impact energy and a Max of 1,700 BiM. Yet it weighs only 25.1 Lbs. for an outstanding power-to-weight ratio. This hammer provides Constant Response circuitry for constant power under load, as well as smooth starts and overload protection. The hammer’s variable-speed dial allows the operator to match the hammering power to application – from 900 BiM to 1,700 BiM. For added user comfort, it features Vario-Lock positioning for rotating and locking the chisel with precision, a 360° rotating auxiliary handle and a padded rear handle. The SDS-max® chuck system provides tool-free bit changes.

Features

• In-line design – better weight distribution for concrete chiseling and light-duty demolition in horizontal applications
• Best-in-class impact energy – 17 Ft.-Lbs. provides maximum concrete removal for productivity
• Power-to-weight ratio – 15.0 Amp demo hammer delivers 1,700 BPM at 25.1 Lbs. weight
• Vibration Control technology – reduces vibration in hammer mechanism and at handle for improved comfort in all-day demolition applications
• Constant Response circuitry – reliable operation with constant speed under load, soft-start control and overload protection
• Vario-Lock positioning – locks chisel in one of 12 positions for optimized work angle
• 360° auxiliary handle – operator comfort due to a wide range of positioning
• Variable-speed dial – accurate bit starting and controlled chiseling
• SDS-max® bit system – ease of use with tool-free bit changes with automatic bit locking and maximum impact-energy transfer rate
• Service Minderlight – indicates when preventative maintenance is required
• Padded rear handle – for additional comfort

Includes

Carrying Case

18V BRUSHLESS COMPACT HAMMER DRILL KIT 18V BRUSHLESS COMPACT TOUGH™ HAMMER DRILL DRIVER W/ (2) 4.0 AH BATTERIES

• Diamond Products #4220050 M1AA-15 Portable Core Rig with 15 Amp Motor
• 6” Bit Capacity

Features

• Weighs only 35 lbs.
• Single speed-800 RPM
• Spring loaded slide handle for easy coring
• Convenient carrying handle on carriage
• Easy to use for standard hole drilling
• Light weight and portable
• Uses standard power outlets
• Small compact unit for precise coring
• No separate amp meter box
• Trap ring keeps water contained
• Lower cost alternative to larger rigs