Accessories

STD CHISEL, 3”, 1-1/4 X 6 X 72 (6’)

CLAY SPADE, 1-1/4 X 6 X 16

We offer the 3M™ Roloc™ Shank allows 3M™ Roloc™ Disc Pads to fit a collet on a die grinder or disc sander, or a drill chuck on a drill. The 1/4-inch (6 mm) external threads fit Roloc™ Disc Pads with 1/4-20 internal threads.

• Steel erectors and fabricators use Ajax Riggers Tools to align steel beams and plate.
• Note: Drift Pins are 1/16” larger than the bolt or hole.
• For example, a 13/16 diameter pin should be used for 3/4” bolt or hole.
• Also other styles and sizes are available upon request.
• 8 in (203.2 mm) Overall Length; 13/16 in (20.6 mm) Standard Diameter; 2-1/2 in (63.5 mm) Length of Taper; 3/8 in (9.5 mm) Point Size; Barrel Drift Pin

CURE SPRAYER GUN

Apex Fastener Tools offers a male hex power drive extension with a 1/4” male square. The Hex tolerances on Apex EX-250-3 Extensions are typically 35% tighter than ANSI specifications and 48% tighter than DIN specifications. The drive size of a power wrench can be adjusted using a hex power drive adapter to fit a power socket with a different drive size. To extend the reach of the tool and provide access to fasteners in awkward places, EX-250-3 Power Socket Extensions are fitted between the drive tool and the socket. When loosening and tightening screws, an impact power wrench produces more torque and vibration, which the Drive extension can withstand.

Features

• Easy to install
• The compact design offers easy handling for various tasks

Apex Fastener Tools offers a male hex power drive extension with a 1/4” male square. The Hex tolerances on Apex EX-250-6 Extensions are typically 35% tighter than ANSI specifications and 48% tighter than DIN specifications. The drive size of a power wrench can be adjusted using a hex power drive adapter to fit a power socket with a different drive size. To extend the reach of the tool and provide access to fasteners in awkward places, EX-250-6 Power Socket Extensions are fitted between the drive tool and the socket. When loosening and tightening screws, an impact power wrench produces more torque and vibration, which the Drive extension can withstand.

Features

• Easy to install
• The compact design offers easy handling for various tasks

Bosch offers a full assortment of 1-1/8 In. hex hammer steel points and chisels. Bosch brings constant innovation to concrete and masonry drilling with increased efficiency and higher durability. All Bosch chisels are manufactured with a proprietary heat-treat process.

Features

• Compacts dirt and tamps asphalt
• Use with HS2173
• Tamper-plate chisel
• One-piece design

Bosch offers a full assortment of 1-1/8 In. hex hammer steel points and chisels. Bosch brings constant innovation to concrete and masonry drilling with increased efficiency and higher durability. All Bosch chisels are manufactured with a proprietary heat-treat process.

Features

• Intermediate connection between breaker hammer and tamper plate or tent stake driver for pitching tents, tamping dirt and asphalt
• Tested for extreme durability through everyday use
• Designed for use with the HS2126
• 15-1/2 In. overall

Features

• Bend 1/2” – 2” conduit on one shoe
• Bender has no loose pieces
• One time set-up
• Less lifting reduces operator fatigue Works with Greenlee 555CX, 555DX and 555C electric conduit benders

Applications

Conduit Bending