Accessories

2IN ELECTRODES

^^CHARGER 120/240 VAC-DISC% USE NEW #13803

WET SPONGE%

BRUSH END ADAPTER KIT INCLUDES ADAPTER, HEX KEY, SCREWS, THUMB SCREW

24IN ELECTRODES

SPRING END ASSEMBLY SOLD PER EACH

2” DOUBLE DISH BARE

Puts an end to tangled ground leads!

Features

• Rotary head turns with the pipe – puts an end to ground lead twist, tangle and wear
• Provides quick, positive ground for roll-out welding of pipe and fittings.
• Cuts down on weld pinholes caused by poor grounding
• Attaches and detaches in seconds

Sumner 781050 Hold Down Device for Jack Stands. Hold-Down Device can Hold Pipe or Shape up to 12” Diameter!
Similar in operation to a chain vise for pipe, the Hold-Down Device uses high tensile strength chain to grip material in any Sumner vee-head jack. Ideal for fitting up flanges, fittings or valves, and a must when working with short lengths.

The Sumner Universal Center Punch has arms which are joined and adjust to pipe circumferences from as small as 4” diameter to whatever pipe or tank size you wish to work on. The Universal Center Punch has the same features found on Sumner’s Center Punch with unlimited capacity. Magnetic arms attach to the steel surface to assure accurate location when using the punch’s spring loaded striking hammer. The center punch comes with a detachable digital gauge with a magnetic base for additional leveling applications. The gauge can be zeroed out and used as an angle finder during fabrication.

Features

• Adjustable arms accommodate 4” to any size steel pipe or tank
• Magnetic base
• Push button spring loaded striking hammer
• Removable digital gauge with magnetic base
• Alignment marks for centering
• Digital gauge can be used as angle finder