Ladders and Work Access

The PD6212 Podium Ladder offers the same reach height as a 14ft stepladder and is ideal for working at fixed heights and is easier to maneuver than scaffolds or lifts. The extra-large platform with toe guard feels like you are standing on the ground and 4X Work Zone allows you to work facing any direction. This ladder features full aluminum bracing and a full set of rear horizontals. The LOCKTOP™ extended guardrail provides an extra point of contact and conveniently organizes tools and accessories. The newly designed EDGE360® gives the bottom of the ladder protection from every angle with integrated rail shield, EDGE bracing and over-sized foot pads.

Features

• Same reach height as a 14ft Stepladder
• 4X Work Zone to reach all directions
• Extra-large platform for long standing comfort
• LOCKTOP™ extended guardrail securely wraps around work zone and holds an arsenal of tools
• EDGE360® includes an integrated rail shield, EDGE bracing and oversized foot pads
• 300lb Load Capacity, Type IA Duty Rating
• Double riveted slip-resistant Traction-Tred® steps
• Back-up plates reinforce all top connectors
• Full set of rear horizontals spaced one per foot
• All steps and two rear horizontals are knee-braced
• Base Width 41.56 inches, Base Spread 92.81 inches

F/G Double Step Ladder, 300LB, 4’

The L6208 Fiberglass 8ft Leaning Ladder is ideal for the professional. With a duty rating of 300lb, it features the LEANSAFE® ladder top that secures tools and accessories, and is uniquely designed to securely lean against flat wall surfaces, wall corners, poles, and wall studs and perform as a standard stepladder. LEANSAFE® ladders have a lower rear rail to front rail connection point allowing the user to get closer to the work when in stepladder mode. Leaning a ladder safely requires that the rear rail is latched to the front rail. Werner’s patent pending single latch design stays engaged when needed, and is centrally located to easily open and close.

Features

• LEANSAFE® Ladder Top with non-marring rubber bumper securely leans against walls, poles, corners, and wall studs, and holds tools to increase productivity
• Dropped rear rail pivot point gets ladder closer to your work
• Color and branding differentiates LEANSAFE® from standard stepladders
• Rail latch with single action opening and closing locks the rear rail to the front rail to keep the ladder in leaning mode
• Curved footpad on front feet maximize surface contact with the ground in both leaning mode and stepladder mode
• Double riveted slip-resistant Traction-Tred® steps
• Back-up plates reinforce all top connectors
• Heavy duty internal spreaders
• Full set of rear horizontals spaced one per foot
• EDGE360® bracing protects the ladder feet from every angle
• Every rivet backed up by metal, metal plates or washers to protect rails
• 8 ft LEANSAFE® leaning ladder in step ladder mode has a maximum standing height of 5 ft 9 in and a maximum reach height of 12 ft
• 8 ft LEANSAFE® leaning ladder in leaning mode has a maximum standing height of 4 ft 9 in and a maximum reach height of 11 ft

F/G Extension Ladder, 300LB, 40’

The Safe-T Ladder Gate, designed for use in combination with the Safe-T Ladder Extension, is perfect for providing additional protection when climbing off or onto a ladder. It includes a self-closing mechanism, is both lightweight and durable, and is compliant with all applicable OSHA regulations.

Aluminum Extension Ladder, 300LB, 20’

F/G Trench Ladder, 300LB, 12’

The L6206 Fiberglass 6ft Leaning Ladder is ideal for the professional. With a duty rating of 300lb, it features the LEANSAFE® ladder top that secures tools and accessories, and is uniquely designed to securely lean against flat wall surfaces, wall corners, poles, and wall studs and perform as a standard stepladder. LEANSAFE® ladders have a lower rear rail to front rail connection point allowing the user to get closer to the work when in stepladder mode. Leaning a ladder safely requires that the rear rail is latched to the front rail. Werner’s patent pending single latch design stays engaged when needed, and is centrally located to easily open and close.

Features

• LEANSAFE® Ladder Top with non-marring rubber bumper securely leans against walls, poles, corners, and wall studs, and holds tools to increase productivity
• Dropped rear rail pivot point gets ladder closer to your work
• Color and branding differentiates LEANSAFE® from standard stepladders
• Rail latch with single action opening and closing locks the rear rail to the front rail to keep the ladder in leaning mode
• Curved footpad on front feet maximize surface contact with the ground in both leaning mode and stepladder mode
• Double riveted slip-resistant Traction-Tred® steps
• Back-up plates reinforce all top connectors
• Heavy duty internal spreaders
• Full set of rear horizontals spaced one per foot
• EDGE360® bracing protects the ladder feet from every angle
• Every rivet backed up by metal, metal plates or washers to protect rails
• 6 ft LEANSAFE® leaning ladder in step ladder mode has a maximum standing height of 3 ft 10 in and a maximum reach height of 10 ft
• 6 ft LEANSAFE® leaning ladder in leaning mode has a maximum standing height of 2 ft 10 in and a maximum reach height of 9 ft

DOUBLE STEP LADDER, F/G, 14’, 300#

F/G Double Step Ladder, 300LB, 6’