Search in Category
Sockets
Search term required.
Filter Your Search
Color/Finish
Drive Size
No Filtered Results...
Finish
Length Type
Maximum Opening
Measurement Type
No. of Points
Socket Size
No Filtered Results...
Subcategory
Shop by Category
Loading...
Sockets
Viewing Page 36 of 328
(3,278 results)
1/2INDR FLEX HD REV. RATCHE - PROT J5457F
Item #:
PROT J5457F
Supplier Part #: J5457F
Brand:
PROTO
Features
- 180° flex.
- 72-tooth gear.
- 5° ratcheting angle.
- Small head design and tight swing arc allow fastener to access tight area.
- Full polish shaft with knurled grip allows for a strong slip-resistant grip.
1 PC SOCKET RETAINERS - PROT JRR07520
Item #:
PROT JRR07520
Supplier Part #: JRR07520
Brand:
PROTO
Features
- Retaining rings are used to help secure sockets onto drive tools.
- They are not intended to bear any load.
- The rotational forces are between the drive tool and the socket.
- The resin crush gauge on the pin helps indicate when a socket is excessively worn and should be replaced.
- Drive tool and socket should line up when in use and should not pinch the crush gauge.
- Cracked sockets and/or worn drive tools cause each other to turn excessively in relation to each other. This action pinches the small fin or the crush gauge on these retaining rings. If the crush gauge is pinched, it is an indication that the socket and or the drive tool need to be replaced.
- One-piece construction, no loose parts. Pin is made of resin which allows the material to compress without breaking.
- Part numbers are embossed on the rings near the point at which the pin and ring meet.