Cutting

The RIDGID 226 In-Place Soil Pipe Cutter is a compact tool (17” long) designed to cut hub and no-hub soil pipe, especially where space is limited. The handle is removable to allow use in tight spaces. The feedscrew is equipped with a hand knob for fast adjustment, and a 15” long 1/2” drive ratchet is supplied for operation. If needed, the 226 can also be operated with any 1/2” drive ratchet or 15/16” wrench.

The DWM120 Deep Cut Band Saw has a powerful 10 Amp motor for operating various jobsite applications and cutting rectangular stock up to 5 inches deep. Variable speed dial allows user to vary speed for specific materials and various applications.

The Model 1224 threads a wide range of pipe including black, galvanized and plastic-coated pipe, together with stainless steel, IMC and heavy-wall conduit, as well as rod up to 30 Rockwell C.

The RIDGID® 915 Roll Groover is a manual roll groover for in-place field applications. The 915 requires only 3 1/2” of clearance to travel around a pipe and a minimum of 2 3/4” of exposed pipe for grooving. With the appropriate roll sets, the 915 can groove from 1 1/4” to 12” pipe, the widest range in its class! The 915’s cast-in handle allows for easy transport or chaining the groover down to prevent theft. The 915 is a must for service work crews.

Features

• Original design for 2” pipes.
• Long handle allows two-hand operation.
• Only five ratchets to complete a cut for quick operation.
• The double bevel blade is designed to minimize any damage.(Only MCC)
• Special alloy steel blade with precise heat-treatment insures longer lifespan, which is economical and environmental friendly.
• Made in Japan

Features

• Highest service life for extreme applications: robust, powerful angle grinder with maximum power density in its class for quick work progress
• Longer service life, more power: the Metabo Longlife-motor with patented dust protection, up to 20% more overload capacity and 50% more torque
• Tacho Constamatic (TC) Full-wave Electronics: fast work progress by means of constant speed under load
• Tool free, fast disc change at the touch of a button with the Metabo M-Quick-System
• Tool-free adjustable guard; twist-proof
• Low-vibration side handle Metabo VibraTech (MVT)
• Metabo S-automatic mechanical safety clutch: minimises kick-back to the lowest level when the disc jams unexpectedly – for maximum user safety and swift progress
• Electronic overload protection, soft start and restart protection
• Gear housing can be unscrewed, rotated in 90° steps and remounted for left-handed operation or cutting
• Auto-stop carbon brushes to protect the motor

The Milwaukee M18 FUEL™ 16 in. Chainsaw delivers the power to cut hardwoods, cuts faster than gas, and delivers up to 150 cuts per charge. The unit is designed to meet the performance, durability and ergonomic needs of professional landscape maintenance, power utility, and the installed M18 user. The POWERSTATE™ brushless motor maintains speed under heavy loads without bogging down to outperform small gas engines and higher voltage systems. REDLINK Plus™ intelligence ensures maximum performance and protection from overload, overheating and over discharge. The M18™ REDLITHIUM™ HIGH OUTPUT™ HD12.0 battery delivers unmatched run-time in all applications. M18 FUEL™ technology allows the unit to reach full throttle in under 1 second providing ultimate control and productivity.

Features

• POWERSTATE™ Brushless motor: purposely built for the M18 FUEL™ 16 in. chainsaw to generate the power and performance of a gas engine up to 40CC
• REDLINK Plus™ intelligence: ensures optimal performance and provides overload protection to prevent damage to the tool and battery during heavy applications while still maintaining compatibility across the entire M18™ system
• REDLITHIUM™ HIGH OUTPUT™ HD12.0 battery pack: provides 50% more power and runs 50% cooler versus standard REDLITHIUM™ HD packs; superior pack construction provides the industry’s best protection against jobsite conditions
• 16 in. Oregon bar and chain
• Dual-stud for improved bar and chain retention
• Automatic oiler for proper chain lubrication and increased productivity
• Onboard storage for scrench
• Compatible with 150+ M18™ tools

Cutter Wheel, Compatible with Manufacturer Model Number 4990, 4991, Compatible with Brand Wheeler-Rex, Product Type Replacement Cutter Wheel

The RIDGID Constant Swing Tubing Cutters Models 150 and 150-L still provide best-in-class cutting accuracy and cutter wheel life, a constant swing radius design that makes them useful in tight space applications and an enclosed feed screw to prevent clogging or jamming. In addition, a spare cutter wheel is still included in the knob for maximum uptime, and a fold-away reamer is stored in the frame for proper tube preparation.

The RIDGID 31652 Quick-Acting Tubing Cutter delivers fast and clean cuts every time. Offering enhanced productivity, the tube cutter has a large ergonomic X-CEL knob that provides a firmer grip so you can cut tubing quickly and easily, and an X-CEL ball detent wheel pin that allows for quick, tool-free cutter wheel changes in seconds, with no lost clips.

Built to stand the test of time, the metal tube cutter features sturdy I-beam construction and durable, hardened wear surfaces. It has thrust bearing slide assemblies for smooth operation, and a convenient fold-away reamer.

The tubing cutter has a 1-7/8In – 4-1/2In cutting capacity and is available in models for cutting plastic pipe or metallic tubing.