Lubricants

SUPREME 9000 0W-20SYNTHETIC OIL

Sprayon LU204 Dry Film Graphite Lubricant is a high lubricity graphite that adheres to most surfaces with minimum surface preparation. It air dries rapidly at room temperature to provide clean, long-wearing lubrication. LU204 is also conductive and may be used where lubrication and electrical properties are both required.

Features

• Dries rapidly
• Reduces friction and wear
• High temperature

Applications

Pre-assembly lubrication of moving parts, mechanisms, vending machines, parking meters, automotive & industrial gaskets, bearings, locks, springs, hinges, mating surfaces on machines, plating nonconductors and curing ovens.

30W OIL QUART

AIR TOOL LUBE, 16OZ

HAMMER GREASE, 1 OZ.

The Aervoe ToolMates General Purpose Silicone Spray Lubricant (12-Pack) is a high-quality chemical product formulated to provide excellent lubrication properties and superior resistance against oxidation. Its five-percent silicone formula produces a thin, non-sticky lubricating film that reduces friction and keeps any moving or sliding part operating smoothly. It is water-repellant and prevents freezing.
This all-purpose silicone lubricant by Aervoe can be used on a wide variety of materials such as wood, nylon, metal, rubber, canvas, leather, chrome, and many others. It is safe and will not harm most plastics. It dries slowly ensuring full penetration into surfaces. Ideal for manufacturing facilities, it offers a working temperature range of 40 degrees Fahrenheit up to 110 degrees Fahrenheit (five degrees Celsius to 43 degrees Celsius).
The Aervoe ToolMates General Purpose Silicone Spray Lubricant (12-Pack) can be sprayed from a distance of six inches through ten inches. To reach inaccessible areas, it comes with an extension tube that allows quick and accurate application. Each package includes 12 cans of 10.5-ounce lubricant and a one-year manufacturer’s warranty.

Features

• Size: 10.5 oz
• Spray distance of 6” up to 10”
• Extension tube for hard-to-reach areas
• Formula contains 5% silicone
• Produces thin, non-sticky lubricating film
• Dries slowly for full penetration
• Adheres to wood, nylon, metal, rubber, canvas, leather, and chrome
• Safe to use on most plastics
• Excellent resistance to water and oxidation
• Working temperature of 40°F to 110°F (5°C to 43°C)
• Ideal for manufacturing facilities
• Not for use on machinery while in operation
• Includes 12 cans of 10.5-oz lubricant
• 1-year manufacturer’s warranty

Average COF : 0.18; Base Material : Polymer; Container Capacity : 1.000 GAL (3.790 L); PH Range : 7.000 – 8.000; Standard : C/US UL Listed; Sub Brand : Cable-Gel; Viscosity : 8000 – 12000 CPS; Weight : 8.500 LB (3.900 KG)

Features

• Polymer-based, no silicon lubricant offers lower frictionand easier pulling
• Compatible with all cable insulation types
• Cleans up quickly. Non-staining
• Higher lubricity than competitive products
• Will not cement itself to the pipe
• Dries slowly
• Can be applied by hand or pump
• Will not break down or separate after exposure to heat or cold
• Environmentally safe/non-hazardous

RIDGID thread cutting oils cools threads and pipe during operation.

HEDGE TRIMMER GREASE

MARINE GREASE CARTRIDGES