Fuel

Features

• Fire tested and FM Approved
• ADA compliant
• Large internal neck cavity minimizes clogging
• Galvanized steel bucket base
• Made with flame retardant polyethylene
• Tie-down notches for extra security in severe weather

Features

• Color coding avoids accidents
• Stainless steel flame arrester prevents flashback ignition
• Easy-to-use Safe-Squeeze® trigger for controlled pouring
• Two-openings; one for targeted pouring, one with ergonomically designed lift-lever for easy filling
• Approved by FM, UL/ULC, and TUV; also meets OSHA and NFPA requirements

NO SPILL 5 GALLON GAS CAN

• Fill-Rite Model FR1211H is a 12-Volt 15 GPM fuel transfer pump that comes with a 3/4 in. x 12 ft. discharge hose, 3/4 in. manual nozzle, 807C mechanical 3-digit fuel transfer meter (gallons), 1 in. x 34 in. telescoping steel suction pipe, 3/4 in. elbow, 5 ft. 12-Gauge ground wire, and a 18 ft. 12-Gauge 2-wire battery cable. It can be used to pump gasoline, diesel, kerosene, ethanol blends up to 15%, methanol blends up to 15%, and bio-diesel up to B20.
• It is important to note that the previous FR1211G model has been updated to the FR1211H model. With a removable junction box, the product is now easier to install. The performance specifications of the product did not change.

Features

• Flow Rate: 15 GPM
• Power Supply: 12V DC
• Fluids: Diesel & Gasoline
• Inlet: 1 Inch
• Outlet: 3/4 Inch
• Includes: 3/4” x 12’ Hose w/ Static Wire, 3/4” Manual Nozzle & 807C Mechanical Meter (Gallons)

DELTA 24“x24“x 24” 50G SQ TRANSFER TANK

Eagle 2.5 Gallon Type-II Safety Can (U226S) feature two openings, one with a pressure-relief spring closing lid for filling, one with an actuated pour valve with a flexible metal spout for safer controlled dispensing. The filler spout and flame arrestors in both openings are non-sparking brass designed for flashback protection. Can includes a 7/8” flexible metal spout and a red (for gasoline and other flammable liquids) powder coat finish with a trilingual label. FM, UL, and ULC Approved and meet OSHA and NFPA Code 30 requirements. Compliance: OSHA 29 CFR 1910.106, 1925.152 and NFPA Code 30.

Features

• 7/8” pouring hose
• 24-gauge hot dipped galvanized steel construction
• Spring closing lid for filling and a separate hose for accurate pouring
• Patented comfort grip
• Non-sparking flame arrester
• Baked on powder coat finish
• Double interlock, no-weld bottom seam
• Deep drawn construction means no top or side seams