Signs and Lights

SEWER PIPELINE DECAL

WATER PIPELINE DECAL

10FT QUICK CON. SAFETY WHIP

Stainless Steel Quick Disconnect Base Powered with affixed Pig Tail single power lead.
Our Quick Disconnect mounts are an extreme benefit for a super-fast install and removal of the whip for end users; whips can even be disconnected one handed which is extremely beneficial. Our Quick Disconnect adaptors are great for clients but most importantly our stocking distributors; as that enables any whip to be a Quick Disconnect Whip easily. We offer Quick Disconnect adaptors without the receiving base and Quick Disconnect Adaptor Kits with the adaptor and receiving base mount for use in converting any powered or non-powered ½? 20 thread whip connection to a Quick Disconnect Whip. Our Quick Disconnect mounts and accessories are so simple to operate as they utilize Snap type (ball latching) quick disconnects which are manufactured with a spring loaded ball latching mechanism which automatically locks the two halves of the fitting together when they are pushed together. When the releasing sleeve is pulled back, the interior end and exterior ends quickly unlock from each other. Since many whip users remove their whip several times a day to get on or off highway; this quick release component is beneficial for whip users who require frequent install and removal of the whip throughout the life cycle of the whip. These QDCs can handle pressure, jolts and jarring on a consistent basis as evidenced by the mining industry we started using SafetyWhips® in so many years ago.

The 1005 Series Halogen Work Light has dual light fixtures that can be directed independently of each other. The two fixtures are attached to a base unit that can be removed from the tripod stand for low angle illumination. The stand will extend the dual fixtures up to 6 feet off the ground. Each fixture uses a single 500 watt halogen bulb independently controlled by its own sealed push button switch for a combined output of 1000 watts. Each fixture has a tempered glass lens and a metal safety grill. The entire unit is powder-coated for long-wear durability. The foam grip handles makes positioning each light a snap, and the center-mounted handle aids in removing, mounting and moving the base unit. Has a 6’ 18/3 SJTW cord.

Features

• Dual light fixtures that can be pointed in different directions for maximum lighting
• Light fixture base unit can be removed from tripod stand for low angle illumination
• The tripod stand will extend the lights up to 6 feet high
• Each fixture uses a single 500 watt halogen bulb (included)
• Each fixture has its own sealed push button switch
• Tempered glass lenses and metal safety grills are used for additional protection from the bulbs
• Powder coated for long wear
• Includes a spare 500 watt bulb

This fluorescent work light uses two 13 watt fluorescent bulbs. The dual body rocker switch means that either bulb can be turned on independent of the other, or both at the same time, for a total of 26 watts of light. With both bulbs turned on, the amount of light produced is similar to that of a 125 watt incandescent bulb, but with a daylight color to it. The electronic ballast provides instant, no-flicker cold weather starts. The handle has a natural ergonomic shape making it easy to hold and use. Built into the handle is a single 12 amp grounded Single Outlet making it possible to power another tool or device directly from the handle. For hands-free use, this product has dual swivel hooks…one mount at the top, and the other low down on the body. This unit has a 6 foot 16/3 SJT cord.

Features

• Two cool running 13 watt fluorescent bulbs for a total of 26 watts of light
• Similar amount of light to a 125 watt incandescent bulb but with a daylight color (6500 Kelvin)
• Ergonomic handle shape makes it easy to hold and use the light
• Built in single grounded outlet (12amp) makes it possible to plug a tool directly into the handle of the light
• Electronic ballast provides instant no flicker cold weather starts
• Dual integrated swivel hooks for hands-free use
• Flame retardant polypropylene handle

METAL WHISTLE (NO LANYARD) Z# G5197538 (12)

These high visibility reflective strips are excellent for night workers wearing hard hats. Designed for placement on all sides of the helmet. Made in the USA.

Features

• Measurements: 1”-in. W x 4”-in. L
• Oralite material
• 16 straps per sheet
• Easy-to-apply

Halo Replacement Clips

Halo Replacement Door