Protective Clothing

NOMEX III COVERALL 4.5 OZ TAN LG 42-44

NOMEX III COVERALL MEDIUM 38-40

NOMEX III COVERALL XL 46-48

SM BACK SUPPORT BELT W/ SUSPENSION

Radians SV46 Surveyor Type R Class 2 Breakaway Safety Vest has Zip-N-Rip™ closure at shoulders, sides and front zipper closure that breakaway when tugged with moderate force. Excellent choice for extreme work environments around moving machinery and equipment to prevent pulling workers into hazards. Contrast trim combinations make workers much more noticeable in low light and broad daylight conditions.

Features

• Closure: Zip-N-Rip™.
• 2” Silver Tape Reflective Material. 1 horizontal stripe.
• Contrasting Trim Detail.
• 5 Point Breakaway – Shoulders, Sides and Zipper Closure.
• Pockets: Upper Split Pad/Pencil, Upper Radio/Phone, 2 Each Lower Flap Covered, 2 Large Deep Open Inside, 1 Inside Flashlight.
• Mic Tab on Both Shoulders.
• Materials: 100% Polyester Solid Knit Front, 100% Polyester Mesh Back.
• Meets ANSI/ISEA 107 Standards.

Radians SV46 Surveyor Type R Class 2 Breakaway Safety Vest has Zip-N-Rip™ closure at shoulders, sides and front zipper closure that breakaway when tugged with moderate force. Excellent choice for extreme work environments around moving machinery and equipment to prevent pulling workers into hazards. Contrast trim combinations make workers much more noticeable in low light and broad daylight conditions.

Features

• Closure: Zip-N-Rip™.
• 2” Silver Tape Reflective Material. 1 horizontal stripe.
• Contrasting Trim Detail.
• 5 Point Breakaway – Shoulders, Sides and Zipper Closure.
• Pockets: Upper Split Pad/Pencil, Upper Radio/Phone, 2 Each Lower Flap Covered, 2 Large Deep Open Inside, 1 Inside Flashlight.
• Mic Tab on Both Shoulders.
• Materials: 100% Polyester Solid Knit Front, 100% Polyester Mesh Back.
• Meets ANSI/ISEA 107 Standards.

Radians SV6 Two Tone Surveyor Type R Class 2 Safety Vest has the same features as the SV7 Surveyor safety vest, with the addition of contrasting trim on stripes. Perfect to wear in daytime conditions. Contrast trim combinations make workers much more noticeable in low light and broad daylight. Available in all mesh, as well as solid front and mesh back.

Features

• Closure: Zipper.
• 2” silver tape reflective material. 1 horizontal stripe.
• Contrasting trim detail.
• Pockets: 1 split pad/pencil, 1 radio, 2 each lower flap covered, 2 each deep inside pockets.
• Mic tab on both shoulders.
• Materials: 100% polyester solid front and mesh back or 100% polyester mesh.
• Meets ANSI/ISEA 107 Standards.

• Standard
• Snaps
• US Steel Green

Features

• 9 oz, green flame resistant cotton cape sleeves
• Made from flame resistant, 100% cotton Westex® FR7A®
• 9 oz flame resistant 100% cotton fabric meets ASTM D6413-10
• ASTM D6413-10 is used to determine a pass/fail criteria for ASTM F1506, which requires a maximum char length of 6 inches
• Designed for protection on shoulders, upper chest, and arms with increased ventilation on back
• Made from flame resistant, 100% cotton Westex® FR7A®
• Cool, comfortable, washable
• Offers protection from sudden flame exposure, light welding and sparks
• Snap fasteners
• 6120 20” bib is not included as shown in photo

• Standard
• Snaps
• US Steel Green

Features

• 9 oz, green flame resistant cotton cape sleeves
• Made from flame resistant, 100% cotton Westex® FR7A®
• 9 oz flame resistant 100% cotton fabric meets ASTM D6413-10
• ASTM D6413-10 is used to determine a pass/fail criteria for ASTM F1506, which requires a maximum char length of 6 inches
• Designed for protection on shoulders, upper chest, and arms with increased ventilation on back
• Made from flame resistant, 100% cotton Westex® FR7A®
• Cool, comfortable, washable
• Offers protection from sudden flame exposure, light welding and sparks
• Snap fasteners
• 6120 20” bib is not included as shown in photo

• Standard
• Snaps
• Orange

Features

• 9 oz, high-visibility orange flame resistant cotton jacket
• Made from flame resistant, 100% cotton Westex® FR7A®
• 9 oz flame resistant 100% cotton fabric meets ASTM D6413-10
• ASTM D6413-10 is used to determine a pass/fail criteria for ASTM F1506, which requires a maximum char length of 6 inches
• 30” length
• Added flame resistant reflective stripes
• Cool, comfortable, washable
• Offers protection from sudden flame exposure, light welding and sparks
• Snap fasteners
• Designed for light duty welding only
• Must keep clean to ensure protection