Fall Protection

Equipment users must be trained and understand all regulatory requirements applicable to the work place in which the fall protection equipment is to be used. These instructions are not a substitute for a formal fall protection training program. Such training, should include rules and regulations applicable to the work situation, a hand-on opportunity to learn how to wear and attach equipment properly, instructions about adequate anchor points and proper techniques for securing and connecting lanyards, or lifelines, and guidance and demonstration on how to inspect and maintain the equipment.

SYSTEM REQUIREMENTS:
The ULTRA-SAFE anchor brackets are constructed to meet the OSHA/ANSI performance requirements of, anchorage connectors, for a single person, personal fall arrest and restraint systems. In accordance with these specifications the ULTRA-SAFE anchorage connectors are capable of sustaining a static tensile load of 5000 lbs. Therefore the brackets are suitable anchorage for a single person ( 400 lbs.) use all 12 pc.’s of #12 screws and stagger them 6 per side of base on 20 gauge thick metal material.This fall arrest system at 5000 lbs. (when screwed down correctly) Use all 20 pc.’s of 16d galvanized nails and stagger them to the framing member on top of sheathing. A single person fall restraint/positioning system at 3000 lbs. (when nailed down correctly) when installed and used properly.The reusable roof anchor fits any roof pitch allowing anchoring from either side.When installed in accordance with these instructions, it will provide an anchor point at the peak of the roof that is suitable for use with the ULTRA-SAFE fall arrest system. The roof peak anchor should be used in conjunction with wall planks, supported by roofing brackets, when installing conventional roofing systems on truss, rafter, and plywood sheathing constructions.

• Small rebar hooks on both ends
• Shock absorbing pack

1/2In x 6Ft Nylon Rope Lanyard

WARNING: This product is part of a personal fall arrest system. The user must read and follow the manufacturers instructions for each component of the system.These instructions must be provided to the user of this product. The user must read and understand these instructions before using this product. Manufacturers instructions must be followed for proper use and maintenance of this product. Alteration or misuse of this product, or failure to follow instructions may result in serious injury or death.

ANCHORAGE: The anchorage to which this product is attached must be capable of sustaining a static load in the direction applied by the personal fall arrest system of at least 3600 Ibs. With certification of a qualified person, or 5000 Ibs. without certification. When more than one personal fall arrest system is attached to the same structure, the strength requirements stated above must be multiplied by the number of personal arrest systems attached to the structure. PLAN your personal fall protection system before installing and using this equipment. Consider all factors affecting your safety during use of this equipment.

CAUTION: BEWARE OF PENDULUM SWINGS TO AVOID STRIKING AN OBJECT OR CONTACT WITH A LOWER LEVEL, FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT IN SERIOUS INJURY.

WARNING: This product is part of a personal fall arrest system. The user must read and follow the manufacturers instructions for each component of the system.These instructions must be provided to the user of this product. The user must read and understand these instructions before using this product. Manufacturers instructions must be followed for proper use and maintenance of this product. Alteration or misuse of this product, or failure to follow instructions may result in serious injury or death.

ANCHORAGE: The anchorage to which this product is attached must be capable of sustaining a static load in the direction applied by the personal fall arrest system of at least 3600 Ibs. With certification of a qualified person, or 5000 Ibs. without certification. When more than one personal fall arrest system is attached to the same structure, the strength requirements stated above must be multiplied by the number of personal arrest systems attached to the structure. PLAN your personal fall protection system before installing and using this equipment. Consider all factors affecting your safety during use of this equipment.

CAUTION: BEWARE OF PENDULUM SWINGS TO AVOID STRIKING AN OBJECT OR CONTACT WITH A LOWER LEVEL, FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT IN SERIOUS INJURY.

Full body harness, positioning type D-ring center back and on each hip with tongue buckle legs and quick release chest, tool belt and X-Pad

RETRACTABLE ROOF BRACKET

• Requires two 1-1/2In holes in decking near truss
• Panted steel construction

The retractable roof bracket attaches to roof decking, to provide personal fall protection for residential roofing projects, when working near a sharp leading edge.The system accommodates a 60’ safety retractable lanyard (part #US-HN60) that provides a 360 degree movement for performing hands-free roof wok with a 60’ radius. Installs easy on sloped or flat roofs. Included are two anchorage devices that will fit rafters or trusses up to 4? x 12? wide, with flexible legs that provide different roof pitch angles and a base that will safely hold a 60’ safety retractable lanyard. Folds up for easy transport and storage.

NOTE: The device must be used with the UltraSafe, Inc. US-HN60 safety retractable lanyard.

1/4In x 5/16In x 3Ft Anchorage/PVC Tie-Off, Ring and Ring

Rope Lifeline, 5/8In x 200Ft, Double Locking Snap One End, Crown Splice Other End

Approved for SHARP LEADING EDGE and foot level drops.