Fall Protection

WARNING: This product is part of a personal fall arrest system. The user must read and follow the manufacturers instructions for each component of the system.These instructions must be provided to the user of this product. The user must read and understand these instructions before using this product. Manufacturers instructions must be followed for proper use and maintenance of this product. Alteration or misuse of this product, or failure to follow instructions may result in serious injury or death.

ANCHORAGE: The anchorage to which this product is attached must be capable of sustaining a static load in the direction applied by the personal fall arrest system of at least 3600 Ibs. With certification of a qualified person, or 5000 Ibs. without certification. When more than one personal fall arrest system is attached to the same structure, the strength requirements stated above must be multiplied by the number of personal arrest systems attached to the structure. PLAN your personal fall protection system before installing and using this equipment. Consider all factors affecting your safety during use of this equipment.

CAUTION: BEWARE OF PENDULUM SWINGS TO AVOID STRIKING AN OBJECT OR CONTACT WITH A LOWER LEVEL, FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT IN SERIOUS INJURY.

Full body harness, positioning type D-ring center back and on each hip with tongue buckle legs and quick release chest, tool belt and X-Pad

1/2In x 6Ft Nylon Rope Lanyard

RETRACTABLE ROOF BRACKET

• Requires two 1-1/2In holes in decking near truss
• Panted steel construction

The retractable roof bracket attaches to roof decking, to provide personal fall protection for residential roofing projects, when working near a sharp leading edge.The system accommodates a 60’ safety retractable lanyard (part #US-HN60) that provides a 360 degree movement for performing hands-free roof wok with a 60’ radius. Installs easy on sloped or flat roofs. Included are two anchorage devices that will fit rafters or trusses up to 4? x 12? wide, with flexible legs that provide different roof pitch angles and a base that will safely hold a 60’ safety retractable lanyard. Folds up for easy transport and storage.

NOTE: The device must be used with the UltraSafe, Inc. US-HN60 safety retractable lanyard.

1/4In x 5/16In x 3Ft Anchorage/PVC Tie-Off, Ring and Ring

Approved for SHARP LEADING EDGE and foot level drops.

AutoCoil2 Web Retractable, 1” x 18’

AutoCoil2 Web Retractable, 1” x 11’ Aluminum Housing; Snap Hook

Rope Lifeline, 5/8In x 200Ft, Double Locking Snap One End, Crown Splice Other End

The 3M™ DBI SALA® Heavy Duty Hook2Loop Tool Tether is constructed from a tubular nylon webbing and is load rated for weights up to 80 lbs.