Search Results

Full body harness, positioning type D-ring center back and on each hip.

Full body harness, positioning type D-ring center back and on each hip.

WARNING: This product is part of a personal fall arrest system. The user must read and follow the manufacturers instructions for each component of the system.These instructions must be provided to the user of this product. The user must read and understand these instructions before using this product. Manufacturers instructions must be followed for proper use and maintenance of this product. Alteration or misuse of this product, or failure to follow instructions may result in serious injury or death.

ANCHORAGE: The anchorage to which this product is attached must be capable of sustaining a static load in the direction applied by the personal fall arrest system of at least 3600 Ibs. With certification of a qualified person, or 5000 Ibs. without certification. When more than one personal fall arrest system is attached to the same structure, the strength requirements stated above must be multiplied by the number of personal arrest systems attached to the structure. PLAN your personal fall protection system before installing and using this equipment. Consider all factors affecting your safety during use of this equipment.

CAUTION: BEWARE OF PENDULUM SWINGS TO AVOID STRIKING AN OBJECT OR CONTACT WITH A LOWER LEVEL, FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT IN SERIOUS INJURY.

• Small rebar hooks on both ends
• Shock absorbing pack

Helps prevent suspension trauma.

Full body harness, positioning type D-ring center back and on each hip with tongue.

Small Carabiner, 3600 lb Gate, 1In Throat

WARNING: This product is part of a personal fall arrest system. The user must read and follow the manufacturers instructions for each component of the system.These instructions must be provided to the user of this product. The user must read and understand these instructions before using this product. Manufacturers instructions must be followed for proper use and maintenance of this product. Alteration or misuse of this product, or failure to follow instructions may result in serious injury or death.

ANCHORAGE: The anchorage to which this product is attached must be capable of sustaining a static load in the direction applied by the personal fall arrest system of at least 3600 Ibs. With certification of a qualified person, or 5000 Ibs. without certification. When more than one personal fall arrest system is attached to the same structure, the strength requirements stated above must be multiplied by the number of personal arrest systems attached to the structure. PLAN your personal fall protection system before installing and using this equipment. Consider all factors affecting your safety during use of this equipment.

CAUTION: BEWARE OF PENDULUM SWINGS TO AVOID STRIKING AN OBJECT OR CONTACT WITH A LOWER LEVEL, FAILURE TO FOLLOW INSTRUCTIONS MAY RESULT IN SERIOUS INJURY.

Full body harness, positioning type D-ring center back and on each hip.

US-5000C Rope Grabs are made of durable non-corrosive stainless steel, brass & bronze.They 100% inspected for function, construction and material integrity and are designed to meet the performance requirements of ANSI Z359.1, OSHA 1926 (maximum 3 ft (0.9m) shock absorbing lanyard) and CSA Z259.2 (a permanently attached 3 ft (0.6m) lanyard) when used with Polysteel / Poly Pro Blend or be positioned not to exceed 6’ free fall. 5/8? (16mm) Rope and installed and maintained properly.

NOTE:This Rope Grab is intended to be used as part of a complete personal fall protection system. All other components subs stems and connectors used in conjunction or attached to this Rope Grab should be compatible and meet the appropriate OSHA /ANSI /CSA requirements for the intended application. Substandard or non-approved components could compromise the reliability of the system and jeopardize safety of the user.