Search Results

5.5HP 9GAL WHEELBRW HONDA COMPRESSOR 9.3CFM

The 6590HK18, which was engineered as an upgrade to the 4090HK17, delivers up to 50% more CFM by comparison. Delivering 13.8 CFM @ 90 PSI, this unit incorporates a 196 cc (GX200) Honda engine with automatic idle-down, for increased fuel efficiency, and an atmospheric unloading system to prevent oil consumption.

About the Pump
Heavy-Duty, Single Stage, Cast-Iron Twin Cylinders, Ball Bearings, Splash Lubricated, Cast-Iron Valve Plates with Swedish Lamellar Reed Valves, Aluminum Alloy Connecting Rods with Automotive-Style Inserts, Multi-Finned 11” Flywheel, Oil Sight Gauge

About the Engine
196 cc (6.5 HP) Honda 4 Cycle, Complete Die Cast Aluminum Alloy with Cast-Iron Sleeve, Overheard Valves, Retractable Starter, On/Off Switch, Splash Lubricated, Low Oil Shutdown

The ROLAIR® 13-HP 30-Gallon Two Stage Truck-Mount Air Compressor w/Electric-Start Honda Engine powers various high-pressure air tools This Rolair compressor outputs 23 cubic-feet-per-minute (CFM) at 175 pounds-per-square-inch (PSI) for reliable performance. With a long-lasting Honda electric start engine, this compressor can output 13-HP to operate your high-powered air tools. When fuel is low, the engine will shut off thanks to the automatic engine idle feature, attributing to increased service life. This 23-cfm compressor is fuel-efficient with an atmospheric unloading system that decreases fuel consumption. It uses a two-stage highly-efficient pump with an intercooler to reduce heat and increase pump life. This truck-mount compressor is intended for use on service vehicles. The fuel tank for this compressor has the capacity of 30-gallons with an oil gauge to help you monitor fuel levels.

Features

• The Rolair 13-HP compressor 13GR30HK30 outputs 123-CFM at 175-PSI to operate air-powered tools
• 13-HP Honda electric-start engine provides sufficient power
• Automatic engine idle turns off the engine when fuel is low for increased service life
• Atmospheric unloading system increases fuel-efficiency
• Efficient two-stage pump uses intercooler to reduce heat and prolong pump life
• Truck mount compressor mounts on service vehicles
• 30-gallon fuel tank with oil gauge for monitoring fuel level
• 12-month warranty from date of purchase or 18-months from date of manufacture

Model VT20ST is the go-to hand carry air compressor for contractors who want a relatively quiet model capable of running all day. The low speed, continuous-duty motor-pump delivers 4.2 CFM @ 90 PSI. The VT20ST features integrated twin tanks for extra air capacity.

Notes

ABOUT THE PUMP
Low Speed ~ Quiet, ROLAIR Quality, Cast-Iron Cylinder, Single Stage, Ball Bearings, Stainless-Steel Reed Valves and Splash Lubrication Ensure Longer Life.
ABOUT THE MOTOR
2 HP, 1700 RPM, S1-Rated for Continuous Duty, Low-Amp Draw, Overload Protection with Manual Reset, 115 Volt, 60 Hz, Heavy-Duty/Industrial Grade with Ball Bearings for Greater Durability.
STANDARD EQUIPMENT
100% Duty-Cycle Motor
Reduced Operating Noise Due to Low-Speed
Start/Stop Pressure Switch with On/Off Lever
Safety Relief Valve
Intake Filter Silencer
12.3 Amp Motor
Initial 10 oz. Oil Fill Included

Model FC250090L features wheels and a handle with an integrated manifold, making this 24-gallon air compressor much more portable and user-friendly than any of its predecessors. It’s perfect for the garage or small workshop. The 2 HP motor/pump produces 5.1 CFM @ 90 PSI and is equipped with manual overload protection and ball bearings for longer life and greater durability.

Notes

ABOUT THE PUMP
ROLAIR Quality, Single Stage, Ball Bearings, Cast-Iron Cylinder, Stainless-Steel Reed Valves and Splash Lubrication Ensure Longer Life.
ABOUT THE MOTOR
2 HP, 3400 RPM, S-1 Rated for Continuous Duty, Low Amp Draw, Overload Protection with Manual Reset, 115 Volt, 60 Hz, Heavy-Duty/Industrial-Grade with Ball Bearings for Greater Durability.
STANDARD EQUIPMENT
100% Duty-Cycle Motor
Start/Stop Pressure Switch
Air Line Regulator
Tank Pressure Gauge
Easy-to-Maneuver 24 Gallon Tank
Wheels and Handle
Safety Relief Valve
Intake Filter/Silencer
Initial 12 oz. Oil Fill Included

9HP 30GAL TRUCK MOUNT HONDA COMPRESSOR 17CFM

Pressure Gauge, 0-300 in 5 lb. Graduations, Automatic Pilot Valve Operation, Industrial Flexible Discharge Hose, Automatic Idle Control for Economy and Long Service Life, Intake Filter w/Silencer & Replaceable Element, Schmidt Belt Tightening Device, Air-Cooled Aftercooler, Totally Enclosed Steel Belt Guard, Safety Relief Valve

Model FC2002 features a classic stack-tank design combined with a low-amp draw, 2 HP motor for high output and consistent production. 4.1 CFM @ 90 PSI. Motor features also include manual-overload protection for longer life and ball bearings for great durability. Oversized crankcase helps hold oil viscosity longer and protects pump on unlevel surfaces.

Notes

ABOUT THE PUMP
ROLAIR Quality, Single Stage, Ball Bearings, Cast-Iron Cylinder, Stainless-Steel Reed Valves and Splash Lubrication Ensure Longer Life.
ABOUT THE MOTOR
2 HP, 3400 RPM, S-1 Rated for Continuous Duty, Low-Amp Draw, Overload Protection with Manual Reset, 115 Volt, 60 Hz, Heavy-Duty/Industrial-Grade with Ball Bearings for Greater Durability.
STANDARD EQUIPMENT
100% Duty-Cycle Motor
Pressure Switch with On/Off Lever
Regulator with Air Line Pressure Gauge
12 oz. Crankcase Pre-filled with Oil
95/125 PSI Operating Pressure
Factory Tested
Safety Relief Valve

5 HP single and two-stage light industrial stationary electric air compressors. Model V5160PT03X shown. Click to view all models in this category.
Optional Equipment: (No optional equipment available for V5160PT03X) Automatic Tank Drain, Low Oil Shut Down, Vibration Pads, Dual Controls, Head Unloader, Refrigerant Air Dryer.

Notes

ABOUT THE PUMP
Single or Two Stage, Cast-Iron Cylinders, Aluminum Head and Crankcase for Faster Heat Dissipation, Ball Bearings, Splash Lubricated, Bearing Inserts on Connecting Rods, Swedish Lamellar Reed Valves, Oil Sight Gauge, Low RPMs to Ensure Long Life and Trouble-Free Performance.
ABOUT THE MOTOR
3450 RPM, 60 Hz, Single Phase 230 Volt, Open Drip-Proof Motor.
STANDARD EQUIPMENT
Pressure Switch – Start/Stop Operation,145-175 PSI Settings, On/Off Switch
Automatic Unloading Device for Loadless Starts
Heavy-Duty Brass Shut-Off Valve
Pressure Gauge, 0-300 PSI in 5 lb. Graduations
Safety Relief Valve – ASME Approved
Multiple V-Belt Drive
Intake Filter/Silencer with Replaceable Element
Totally Enclosed Steel Belt Guard

7.5HP 80GAL 2 STAGE ELEC COMPRESSOR W/STARTER 24.8 CFM