Search Results

8IN H.D. PIPE WRENCH

ST WR BOX 6PC 12 PT

Features

• Retaining rings are used to help secure sockets onto drive tools.
• They are not intended to bear any load.
• The rotational forces are between the drive tool and the socket.
• The resin crush gauge on the pin helps indicate when a socket is excessively worn and should be replaced.
• Drive tool and socket should line up when in use and should not pinch the crush gauge.
• Cracked sockets and/or worn drive tools cause each other to turn excessively in relation to each other. This action pinches the small fin or the crush gauge on these retaining rings. If the crush gauge is pinched, it is an indication that the socket and or the drive tool need to be replaced.
• One-piece construction, no loose parts. Pin is made of resin which allows the material to compress without breaking.
• Part numbers are embossed on the rings near the point at which the pin and ring meet.

COMBO WRENCH 2-1/16 12PT SATIN 15 DEGREE

STRIKING WR 2-3/16IN 12PT

WR STRIKING 1-5/8IN

7/8IN CUT COLD CHISEL

9 PIECE BLACK CHROME NON-REVERSIBLE COMB 9 PIECE BLACK CHROME NON-REVERSIBLE COMBINATION RATCHETING WRENCH SET – SPLINE

WR STRIKING 1-1/4IN

1/2INDR 3/8IN HX DEEP PWR SKT