Search Results

Engineered for convenience, this 8” axial blower is an all-in-one ventilation system. The design allows ducting to collapse into a built-in canister for easy storage. The unit can also be stored vertically to use a minimum amount of space. Includes blower, built-in storage canister and 25 feet of ducting. Certified to CSA STD C22.2 No 113. Air delivery certified CEESI.

Features

• Epoxy powder coated in “safety orange”
• Flange on intake side for optional inlet adapter
• 18 gauge cold rolled steel housing
• 14 gauge steel enclosed panel to protect electrical components
• Welded motor mount construction
• Steel/chrome plated grill
• Handle made of 3-ply rubber belting and equipped with 4 feet
• Motor:
• HP: 1/3 HP
• Certifications: UL Recognized, CSA Certified
• Voltage/Hz: 120V AC, 60 Hz, Single Phase
• RPM: 3200
• Current Draw: 3.6A
• Cord: 6’ (1.82m) AWG 16/3 SJTW 105C 300V neoprene medium duty
• Switch/Plug: Inline ON/OFF, integrated on cord, NEMA 5-15P 125V
• Fan:
• Glass reinforced polypropylene (PPG) three blade fan, with aluminum hub
• Moving fan mounted 1 5/8” (4.12cm) from grill for safety
• Grill Gap – 5/16” (0.79cm)
• Dusting:
• Retractable, non-collapsible design
• Single-ply, PVC coated, vinyl and polyester materials, temp. resistant up to 180°F (82.2°C)
• Yellow color with black weather-strip and integrated nylon straps
• Class 1 hard drawn spring steel wire helix that meets ASTM 227 specs

These large 5? x 8? individually foil-packaged towelettes containing 70% Isopropanol are designed specifically for rubber respirator facepieces. The box is designed as a wall mounted dispenser but can be wall mounted using the box holder (PN 1001-02) instead.

Our Manhole Guard Rail* is constructed of strong, one inch tubular .078 gauge steel that is powder-coated in safety yellow for a durable finish and high visibility. Simple one-piece construction offers easy, no-tools assembly. Rail locks open and two hooking chains provide protected entry and exit. For safety, the rail accommodates signs, flags or lights, and for convenience, it can be used with a guard rail tent, umbrellas or winch.

This assembly is to be used as a ‘Temporary Barrier Railing’ only. See OSHA 1910.146©(5)(ii)(B)

This complete, all-in-one ventilation system includes an 8” axial blower powered by a 12 volt DC Motor, 25 feet of ducting and a built in storage canister. The handle and feet make this light weight system very portable and easy to store.

Features

• Epoxy powder coated in “safety orange”
• Flange on intake side for optional Inlet Adapter
• 18 gauge cold rolled steel housing
• Welded Motor mount Construction
• Steel/chrome plated grill
• Carry handle made of 3-ply rubber belting
• Equipped with four rubber feet
• Motor:
• HP: 1/4 HP, 12V DC
• RPM: 3800
• Current Draw: 22A
• Fuse: Inline 30A
• Cord: 15’ (4.57 m) SJTW, AWG 12/2 90C 300V neoprene medium duty
• Plug: Alligator clips

Provides comfortable protection against overspray and other particulates. Spray Sock fits over the head and can be worn with goggles, half mask or full mask respirators. The stretch knit material is breathable and cool to wear. One size fits all. Available in packages of 12 or a bulk case of 144.

Designed for use on respirator facepieces and other personal safety equipment, these large 5? x 8? towelettes are perfect where the manufacturer recommends using a non-alcohol cleaning wipe. Will not harm even the most sensitive rubber facepieces. Active ingredient: Benzalkonium Chloride.

The most cost effective knee pad in dirty, dusty environments. Comes with two fully adjustable straps with hook and loop closure for a custom fit. The poly cap is stitched on for greater strength and won’t allow particles underneath to cause discomfort. Tough polyester fabric exterior protects a high density lightweight foam core, and the long pad provides extra comfort.

Features

• Hard PE knee cap
• Good oil resistance
• Anti-slip

STATICALLY CONDUCTIVE DUCTING

Designed for use in applications requiring a large amount of output in a hazardous location environment. Our 20” Axial Explosion-Proof Metal Blower is offered with a ½ hp single-phase motor and an efficient three-blade impeller fan in a rugged metal housing. Also included is a NEMA rated 115V plug to be used with an explosion-proof socket (sold separately). Meets Class I, Division 1 and 2, Groups C & D, Class II Division 1 and 2 Groups F & G. UL Listed. Certified to CSA Standard C22.2 No.113.