Search in Category
Search Filters
-
Ultra-Safe x
Filter Your Search
Shop by Category
Fall Protection
Chain Rebar Assembly, 22In with Large Swivel Rebar Hook
Chain Rebar Assembly, 22In with Large Swivel Rebar Hook
3X-Large Positioning Harness, 3 D-Ring, Parachute Buckles
Full body harness, positioning type D-ring center back and on each hip.
Nylon Web Lanyard, 1In x 3Ft, Small Rebar Hooks & Shock Absorbing Pack
- Small rebar hooks on both ends
- Shock absorbing pack
Ultra-Tube Two Shock-Absorbing Y-Lanyard, 1In x 6Ft, Small Rebar Hook Top & 2 Large Rebar Hooks Bottom
- Anchorage: The anchorage to which this product is attached must be capable of sustaining a static load in the direction applied by the personal fall arrest system of at least 3600 lbs. with certification of a qualified person or 5000 lbs. without certification. When more than one personal fall arrest system is attached to the same structure, the strength requirements stated above must be multiplied by the number of personal arrest systems attached to the structure.
- Plan your personal fall protection system. Before installing and using this equipment, consider all factors affecting your safety during use of this equipment.
- Warnings and instructions must be read and understood before using equipment.
- Equipment must be used by trained personnel only.
- Users must understand all OSHA regulations, ANSI standards, and other relevant regulations and standards pertaining to fall protection equipment.
Small Carabiner, 3600 lb Gate, 1In Throat
Small Carabiner, 3600 lb Gate, 1In Throat
Large Carabiner, 3600 lb Gate, 2-1/4In Throat
Large Carabiner, 3600 lb Gate, 2-1/4In Throat
Rope Grab for 5/8In Poly-Dac Rope, Stainless Steel
US-5000C Rope Grabs are made of durable non-corrosive stainless steel, brass & bronze.They 100% inspected for function, construction and material integrity and are designed to meet the performance requirements of ANSI Z359.1, OSHA 1926 (maximum 3 ft (0.9m) shock absorbing lanyard) and CSA Z259.2 (a permanently attached 3 ft (0.6m) lanyard) when used with Polysteel / Poly Pro Blend or be positioned not to exceed 6’ free fall. 5/8? (16mm) Rope and installed and maintained properly.
NOTE:This Rope Grab is intended to be used as part of a complete personal fall protection system. All other components subs stems and connectors used in conjunction or attached to this Rope Grab should be compatible and meet the appropriate OSHA /ANSI /CSA requirements for the intended application. Substandard or non-approved components could compromise the reliability of the system and jeopardize safety of the user.
Small-Large Pillow Flex Positioning Harness, 3 D-Ring, Parachute Buckles
Pillow-Flex harness and 3 D-rings with padded leg straps.
Rope Grab for 5/8In & 3/4In Poly-Dac Rope, Stainless Steel
The model# US-5000 is a rope grabbing device that follows a worker’s movement up and down a vertical lifeline. If a fall occurs, the rope grab locks on the rope and absorbs much of the force generated during the free fall. The unique energy absorbing design of the US-5000 allows the user to Use a standard rope or web lanyard and still meet OSHA’s maximum force requirements.
Model # US-5000 is to be used with 5/8? or 3/4? diameter 3- strand synthetic rope lifeline with minimum tensile strength of 5800 Ib. Polyester type is preferred.
2X-Large Iron Worker's Harness, 3 D-Ring, Back Pad and Tool Belt, Tongue-Buckle Connections
Full body harness, positioning type D-ring center back and on each hip with tongue.